what angle can I go up to?

Post Reply
jeepee
Posts: 8
Joined: Sat Oct 06, 2018 8:43 am
Location: Daventry
Contact:

what angle can I go up to?

#1

Post by jeepee »

Hi everyone. I have another problem which I as a complete novice have no Idea about.
I want to raise my track on a ramp to another level. I don't know how high I can make the upper level as I have no Idea as to what gradient an N gauge train can climb. If some on could advise me on the best angle I will be able to work out the distance and Height according to the size of my layout.
Thank you
User avatar
Walkingthedog
Posts: 4951
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: what angle can I go up to?

#2

Post by Walkingthedog »

The recommended maximum gradient is 1 in 30. So it take 30 inches or cm to rise 1 inch or cm.
Nurse, the screens!
Mountain Goat
Posts: 1529
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: what angle can I go up to?

#3

Post by Mountain Goat »

Better to do a slightly shallower angle if you have the room for it. I like gradients as they allow a challenge which reminds me of the real railways a bit. However, as models have a lot more friction to deal with, they may not pull loads up gradients as easily as one might think. Having said that, due to space restrictions we have with our models, gradients we will use are much steeper as angles tend to do strange things when scaled down from the real thing.
Budget modelling in 0-16.5...
jeepee
Posts: 8
Joined: Sat Oct 06, 2018 8:43 am
Location: Daventry
Contact:

Re: what angle can I go up to?

#4

Post by jeepee »

Ok ,thank you, I have a small layout. 2ftx6ft so I will have to experiment and see what I can get away with
GeoffAlan2
Posts: 89
Joined: Sat Oct 06, 2018 1:57 pm
Contact:

Re: what angle can I go up to?

#5

Post by GeoffAlan2 »

Remember if there's a curve on the gradient you need to make it a lot less steep.
User avatar
Walkingthedog
Posts: 4951
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: what angle can I go up to?

#6

Post by Walkingthedog »

To go up 2 inches will require 5ft and remember it will need the same to go down again.
Nurse, the screens!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests