Easily distracted......
Easily distracted......
I thought I would indulge in traditional Bank Holiday activities namely a fresh coat,or two, of wood preservative on the railway shed.
That means taking off any hinges, door locks etc - that includes a replica GWR numberplate that I bought nearly 40 years ago to use as out house number plate.
That needs a coat of paint, I thought.
So in between slapping on the Ronseal I have made a start on the brass plate.
Sandblasted.
20190506_094231 by Steve Mumford, on Flickr
Polished.
20190506_100052 by Steve Mumford, on Flickr
Masked up and a coat of primer.
20190506_120924 by Steve Mumford, on Flickr
Now it’s time for a sandwich.
That means taking off any hinges, door locks etc - that includes a replica GWR numberplate that I bought nearly 40 years ago to use as out house number plate.
That needs a coat of paint, I thought.
So in between slapping on the Ronseal I have made a start on the brass plate.
Sandblasted.
20190506_094231 by Steve Mumford, on Flickr
Polished.
20190506_100052 by Steve Mumford, on Flickr
Masked up and a coat of primer.
20190506_120924 by Steve Mumford, on Flickr
Now it’s time for a sandwich.
"Not very stable, but incredibly versatile."
-
- Posts: 1537
- Joined: Fri Oct 05, 2018 12:57 pm
- Contact:
Re: Easily distracted......
Very nice. What is the sandwich for? What's in the sandwich? You mean it is lunch?
Budget modelling in 0-16.5...
Re: Easily distracted......
Glad you put a smiley on the end - worried you were being serious.
Toasted ham and cheese.
I did spray the black and green bits later this afternoon and I have a little touching up of the edges to do then I must leave it to thoroughly dry before the final polishing and a coat of lacquer.
The good news is that I managed to finish two of the four sides of the shed.
Toasted ham and cheese.
I did spray the black and green bits later this afternoon and I have a little touching up of the edges to do then I must leave it to thoroughly dry before the final polishing and a coat of lacquer.
The good news is that I managed to finish two of the four sides of the shed.
"Not very stable, but incredibly versatile."
-
- Posts: 1537
- Joined: Fri Oct 05, 2018 12:57 pm
- Contact:
Re: Easily distracted......
Very nice. I have a few wagon plates... Some are pre BR though some are BR. Also have some wagon repair plates. They are all heavy things.
Budget modelling in 0-16.5...
Re: Easily distracted......
Some paint, polish and lacquer and it’s done.
20190507_145523 by Steve Mumford, on Flickr
20190507_145510 by Steve Mumford, on Flickr
And today I got distracted from the plate by rebuilding a waterfall for the pond.
20190507_145523 by Steve Mumford, on Flickr
20190507_145510 by Steve Mumford, on Flickr
And today I got distracted from the plate by rebuilding a waterfall for the pond.
"Not very stable, but incredibly versatile."
Re: Easily distracted......
Very smart.
P.s. I have the very same solar powered LED lights.
R-
P.s. I have the very same solar powered LED lights.
R-
Young at heart. Slightly older in other parts.
- Walkingthedog
- Posts: 4972
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Easily distracted......
I imagine that is a replica plate Steve. Looks wonderful.
Nurse, the screens!
Re: Easily distracted......
Yes Brian it is.Walkingthedog wrote: ↑Tue May 07, 2019 4:35 pm I imagine that is a replica plate Steve. Looks wonderful.
When we bought our first house, no. 74, I spotted an advert in Railway Modeller for house numbers as replica GWR brass loco plates. I think it cost about £25 in 1982. This is the first full repaint and I fully expect it to see me out.
Kids can sell it for scrap then.
"Not very stable, but incredibly versatile."
- Walkingthedog
- Posts: 4972
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Easily distracted......
"Not very stable, but incredibly versatile."
Who is online
Users browsing this forum: bulleidboy and 1 guest