Location - shed codes

A place for real railway discussions.
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Location - shed codes

#11

Post by Walkingthedog »

Still haven’t found it.
Nurse, the screens!
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: Location - shed codes

#12

Post by footplate1947 »

I had look at the wiki list which Tinker posted and way down the list there it was and I may add it was the only H I found as well there may have been others but I did not look further. But does it matter. :)
If only there was enough hours in the day..................John
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Location - shed codes

#13

Post by Walkingthedog »

Fair enough John. There are several H sheds but not 82H.


AJ wanted to know what shed 82H was. Just trying to help.
Nurse, the screens!
Postman Prat
Posts: 130
Joined: Thu Oct 04, 2018 8:25 pm
Location: Southampton
Contact:

Re: Location - shed codes

#14

Post by Postman Prat »

Walkingthedog wrote: Tue May 21, 2019 5:57 pm Still haven’t found it.
I can't find it either - not on the Wiki list. Highest 82 shed that I can find, in several sources, is 82G Templecombe. There is an 83H - Plymouth (Priory) so are we looking at this one in error?

I suspect WTD came up with the correct answer right at the beginning - the East Somerset applied a local sounding shed code for their shed. :geek:
PP
The light at the end of the tunnel is probably a train coming towards you
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Location - shed codes

#15

Post by Walkingthedog »

Not sure why John said there was one. Just trying to confuse me, easily done. :D
Nurse, the screens!
Postman Prat
Posts: 130
Joined: Thu Oct 04, 2018 8:25 pm
Location: Southampton
Contact:

Re: Location - shed codes

#16

Post by Postman Prat »

Hi Footplate

You're right - it doesn't matter at all. Doesn't mean no-one should try to help the OP. He's seen something which appears to be wrong and he's curious as to why. I now know something new which I would not have encountered in a thousand years. The learning days didn't end when I left school.

;)
PP
The light at the end of the tunnel is probably a train coming towards you
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: Location - shed codes

#17

Post by footplate1947 »

You misunderstand me PP What I meant was does it matter if a heritage railway pinched a shed code from another region to give atmosphere to the engine shed. Why are you having a go at me. John
If only there was enough hours in the day..................John
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: Location - shed codes

#18

Post by footplate1947 »

Walkingthedog wrote: Tue May 21, 2019 5:57 pm Still haven’t found it.
Sorry Brian looked again and I got the number wrong I thought I was looking for 84 H for some reason. Sorry took me awhile to get back but been so busy outside while the sun shines. Not been on here a lot.
If only there was enough hours in the day..................John
Postman Prat
Posts: 130
Joined: Thu Oct 04, 2018 8:25 pm
Location: Southampton
Contact:

Re: Location - shed codes

#19

Post by Postman Prat »

Sorry John. There were 2 possible interpretations for your 'does it matter' and I chose the wrong one :oops:

East Somerset was a GW line, shedcode was a local Western Region example so they tied in nicely ;)
PP
The light at the end of the tunnel is probably a train coming towards you
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: Location - shed codes

#20

Post by footplate1947 »

Perhaps I should have written it in a clearer way. Sorry....John
If only there was enough hours in the day..................John
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests