LOW GHYLL

Dedicated area to show the community your model railway projects.
User avatar
Rog (RJ)
Posts: 553
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: LOW GHYLL

#421

Post by Rog (RJ) »

Wow! That's expensive.
User avatar
bulleidboy
Posts: 2310
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: LOW GHYLL

#422

Post by bulleidboy »

Thanks Brian - I had seen it used on a layout in Railway Modeller - I remembered it stretched seven times it's cut length.
Rog (RJ) If you spool down the link it only appears to be £5.85 for a 10 metre reel. Barry
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#423

Post by Steve M »

Rog (RJ) wrote: Sat Aug 17, 2019 8:41 am Wow! That's expensive.
It made my eyes water! And the really isn’t an alternative product available.

While I was researching this project I did find someone on line making comparable poles (rather than the standard mass produced brown plastic versions) and to have used their versions would have cost nearly £200 + the cost of the wires.
All I paid out for was a pack of bamboo skewers and some square hardwood for the arms - about £4. Even paying out for the wires kept me well in budget.

As for the amount needed two posts at ‘normal’ spacing and eight insulators would need just under 5 metres of thread - the short reel would just about do three poles on my layout - I fitted nearly 20 poles in total. :shock:
"Not very stable, but incredibly versatile." ;)
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#424

Post by Steve M »

I have enough poles left over to extend the telegraph pole past the goods shed on the other side of the layout from the engine shed - they will be located at the back of the layout so it may be easier to take that baseboard out of the shed for better access.

But before that I have another job to do. I always fit a crew, usually the Bachmann figures, to my locos but they all seem out of stock locally. I have looked at the 3D figures from ModelU but personally I think they are a bit pricey but having heard about the 3D range from Hardy’s Hobbies I thought I’d have a look.

Single figures start of cheaper but they also sell a ‘lucky dip’ pack of five - worth a punt. In fact this lot work out to be only slightly more per unit than the Bachmann figures.

I guess I’ll be painting tomorrow.
"Not very stable, but incredibly versatile." ;)
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: LOW GHYLL

#425

Post by Walkingthedog »

Dapol workmen figures make good loco crew.
Nurse, the screens!
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#426

Post by Steve M »

Walkingthedog wrote: Sat Aug 17, 2019 1:00 pm Dapol workmen figures make good loco crew.
True, and I have used them in the past, but the variety of poses available from Hardy’s is exceptional IMHO.

And I knew you would post that comment long before I typed mine. :D
"Not very stable, but incredibly versatile." ;)
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: LOW GHYLL

#427

Post by Walkingthedog »

Just looked at Hardys, they are great, think I’ll get a few next time.
Nurse, the screens!
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#428

Post by Steve M »

Opportunity for you to get a Labrador to stand under your man up the pole. :D
"Not very stable, but incredibly versatile." ;)
User avatar
Rog (RJ)
Posts: 553
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: LOW GHYLL

#429

Post by Rog (RJ) »

When I was working for BT many, many moons ago I had someone trying to pinch my ladder while I was at the top of the pole! Good job I'd lashed the top of the ladder to the pole.
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: LOW GHYLL

#430

Post by Walkingthedog »

Oh blimey that never happened to me. Did drop a screwdriver once and it buried itself in the tarmac up to the handle. Didn’t have safety barriers in those days.
Nurse, the screens!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest