South Auckland Junction
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
Latest mini update.
Sanded back the filler on my test piece. It felt very smooth by the end. A quick trip to my spray booth and it shows much more work was needed.
This is why I decided to practice this, and it seems to be a good idea.
In other news, my first ever brand new loco has arrived.
Sanded back the filler on my test piece. It felt very smooth by the end. A quick trip to my spray booth and it shows much more work was needed.
This is why I decided to practice this, and it seems to be a good idea.
In other news, my first ever brand new loco has arrived.
Re: South Auckland Junction
Was that car body filler? If so, it’s always going to need a lot of work to ‘lose’ the edge. Try some Deluxe Materials white putty as it is very fine, fast drying and designed for modelling.
"Not very stable, but incredibly versatile."
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
Second effort, much better. Just need more patience when sanding.
Using 60, 120 then 240 papers.
Using 60, 120 then 240 papers.
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
Framed the openings for the loading docks and staff entrance. Will clip the ends once dry.
Re: South Auckland Junction
Sets like concrete - too much like hard work.
I would recommend a 400 grit or finer, used ‘wet’ to avoid or minimise scratches. As a comparison, I use 2000 grit to flat car paintwork before buffing.
"Not very stable, but incredibly versatile."
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
I'll pick up some finer paper tomorrow. Thanks.Steve M wrote: ↑Sat Oct 05, 2019 5:03 pmSets like concrete - too much like hard work.
I would recommend a 400 grit or finer, used ‘wet’ to avoid or minimise scratches. As a comparison, I use 2000 grit to flat car paintwork before buffing.
Given the new Bagnall a run out. So smooth and quiet. I love it.
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
Is it normal for a feeling of trepidation and dread just before your first ever loco surgery?
- Walkingthedog
- Posts: 4972
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
- JohnSmithUK
- Posts: 185
- Joined: Fri Oct 05, 2018 12:12 pm
- Location: South Shields
- Contact:
Re: South Auckland Junction
The patient appears to have survived, and a missing ladder has been transplanted. A little tidying to do, but all ok.
Who is online
Users browsing this forum: No registered users and 0 guests