Track plans

Help with designing your track work
Nick8873
Posts: 24
Joined: Sun Dec 01, 2019 7:33 pm
Contact:

Track plans

#1

Post by Nick8873 »

Hi does anyone know of a computer software track plan got a few ideas for a layout but instead of spending ages drawing to scale and getting curves right thought be easier do on a computer or tablet
Nick
User avatar
Steve M
Posts: 3528
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Track plans

#2

Post by Steve M »

Anyrail or SCARM are available but I think the free versions limit the number of track sections you can lay at any one time.
Certainly, the subscription version of SCARM is unlimited.
"Not very stable, but incredibly versatile." ;)
User avatar
Mr Bones
Posts: 693
Joined: Sun Oct 14, 2018 9:24 pm
Location: Canterbury Area
Contact:

Re: Track plans

#3

Post by Mr Bones »

Anyrail is good. The unregistered version is limited to 50 pieces of track. I purchased the licence which I don't regret as I'm constantly tweaking the plan.
SCARM is fine, but not quite as refined as Anyrail.
And the Lord said unto John “Come forth and receive eternal life”, but John came fifth and won a toaster!
Nick8873
Posts: 24
Joined: Sun Dec 01, 2019 7:33 pm
Contact:

Re: Track plans

#4

Post by Nick8873 »

Ok great will have a look thanks
Nick
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: Track plans

#5

Post by Bandit Mick »

I do a rough sketch on paper then start to physically place track on a board and move it around. Points can be copied from Peco's website so you don't waste money on buying the wrong ones.
User avatar
Walkingthedog
Posts: 5023
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track plans

#6

Post by Walkingthedog »

I use the same system. Get some track down asap.
Nurse, the screens!
User avatar
Steve M
Posts: 3528
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Track plans

#7

Post by Steve M »

I have to admit that I too ‘just get the track down’ - but once I settled on a design I copied it into SCARM for ‘posterity’.
That was useful as I could trial later changes on screen before committing to ripping up scenery.
"Not very stable, but incredibly versatile." ;)
User avatar
Walkingthedog
Posts: 5023
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track plans

#8

Post by Walkingthedog »

Now that is a good way of doing things Steve.
Nurse, the screens!
User avatar
IanS
Posts: 933
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Track plans

#9

Post by IanS »

I found that I procrastinated a long time, around 5 years, using AnyRail. I enjoyed producing track plans but never seemed to get the right one.

Eventually I put the track on a board - which I'm still doing - and it much more satisfying for me. It may still take another 5 years (or more) to get the layout anywhere near 'finished' but at least trains will run on the tracks now.
User avatar
Steve M
Posts: 3528
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Track plans

#10

Post by Steve M »

IanS wrote: Tue Dec 24, 2019 2:28 pm I found that I procrastinated a long time, around 5 years, using AnyRail. I enjoyed producing track plans but never seemed to get the right one.

Eventually I put the track on a board - which I'm still doing - and it much more satisfying for me. It may still take another 5 years (or more) to get the layout anywhere near 'finished' but at least trains will run on the tracks now.
Some never get beyond virtual plans.

Mind you I have a virtual plan to be a millionaire. :D
"Not very stable, but incredibly versatile." ;)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests