lokpilot basic 51692 decoder
lokpilot basic 51692 decoder
Hi there.hope against hope but does anybody have the colour coding for the above decoder.the 4 main colours (red,orange,black and grey are missing from the decoder output .thank you
- Walkingthedog
- Posts: 4972
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: lokpilot basic 51692 decoder
Hi
I'm unable to find any information re an ESU lokPilot basic decoder with the number you've stated.
The ESU lokpilot web page states that there are two available LokPilot basic decoders but are different numbers to what you have given! Here is the web site for the Basic V1.0 http://www.esu.eu/en/products/former-pr ... basic-v10/ If it is one of those shown, then the wiring colours and their positions can be clearly seen from the image at the bottom of the page when its clicked on.
I'm unable to find any information re an ESU lokPilot basic decoder with the number you've stated.
The ESU lokpilot web page states that there are two available LokPilot basic decoders but are different numbers to what you have given! Here is the web site for the Basic V1.0 http://www.esu.eu/en/products/former-pr ... basic-v10/ If it is one of those shown, then the wiring colours and their positions can be clearly seen from the image at the bottom of the page when its clicked on.
Re: lokpilot basic 51692 decoder
I have the colours and how to connect them,the problem is that its an old decoder and the 4 wires mentioned are detached from the plug and I don't know which wire goes to which terminal,the r wires are still connected but I don't need them.the website mentioned I have been onto but its the right decoder but the wires are not shown as its a plug in harness.its the r/h photo
Re: lokpilot basic 51692 decoder
Is the plug an 8 pin in a 4 x 4 configuration or a 9 pin straight type?
Re: lokpilot basic 51692 decoder
it is a 9 pin straight connector,i have help from a friend who thinks he has a similar decoder so he is checking for me.i can see thro a magnifying glass that the terminal point for the 2nd wire in is labeled black and the 1st is possibly labelled red.thanks for your help both of you, i will let you know if i sort it.
-
- Posts: 5
- Joined: Tue Jun 04, 2019 8:15 pm
- Contact:
Re: lokpilot basic 51692 decoder
Looks like a mis-typing of the model number.
Should it be 52690 ?
The decoder in the r/h photo is labelled as 21MTC, meaning it's a 21 pin direct fit decoder. There are no wires with this type of connector.
Re: lokpilot basic 51692 decoder
hello again,just to let you all know i have sorted the decoder out and have it running again.thanks for your time and efforts,mickrick
Who is online
Users browsing this forum: No registered users and 3 guests