Woodworking Advice Please

A place to chat about non railway items. Please observe the forum rules!
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Woodworking Advice Please

#11

Post by Steve M »

yelrow wrote: Tue Mar 31, 2020 10:27 am Steve, to me thats a coach screw. Interesting. I would certainly attempt the glue fix, before paying for a chippie, who will not be able to come till about july, based on isolation
They go by either name John. My father would always use the term lag bolt so that must have stuck in the memory. Maybe a regional term, boulon de l'entraîneur in your neck of the woods? :D

In Sandy’s situation I’d recommend pre-drilling a hole and using a large flat washer with each bolt to spread the load when tightening up with a suitable socket. A couple of 5” bolts should do assuming it’s a 2” joist and a 4” newel - if smaller than that drop to a 4” bolt. The hardest part of the job would be getting access in the first place and having enough space between the joists to get a drill in.
"Not very stable, but incredibly versatile." ;)
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Woodworking Advice Please

#12

Post by sandy »

Thanks all you chaps for your advice. I will get it fixed later when things get better. It is only slightly loose at the moment. Not flopping around. I like to nip things in the bud normally but this time I will leave it to an expert later in year when things settle down.
Will get on with fitting my loft ladder now which has been waiting a month to be done. Even I can do that. It is all in a kit. :)
Sandy
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Woodworking Advice Please

#13

Post by Walkingthedog »

Lag screws are what Americans call coach screws.
Nurse, the screens!
User avatar
yelrow
Posts: 954
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgundy, France
Contact:

Re: Woodworking Advice Please

#14

Post by yelrow »

Steve, any american connections,?.
User avatar
yelrow
Posts: 954
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgundy, France
Contact:

Re: Woodworking Advice Please

#15

Post by yelrow »

WTD, when i first moved to lancaster, i ran the RAAB KARCHER, shop. They were big timber merchants. They called them coach screws, and coach bolts. That was where my massive supply of screws and bolts came from. Staff discount was very very generous, so i stocked up. That was in 1989, and still today, have large supply. I sold a big Bosch Drill, to a joiner, who returned it for refund 2 weeks later. MD, said any use to you for €20 . Still using today.
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Woodworking Advice Please

#16

Post by Walkingthedog »

We have a hardware shop near us where you can buy one of anything. They have containers full of washers, bolts, split pins.........etc, etc,. I’m like a kid in a sweet shop when I go there.
Nurse, the screens!
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Woodworking Advice Please

#17

Post by Steve M »

yelrow wrote: Tue Mar 31, 2020 2:33 pm Steve, any american connections,?.
Thankfully, no.
"Not very stable, but incredibly versatile." ;)
User avatar
yelrow
Posts: 954
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgundy, France
Contact:

Re: Woodworking Advice Please

#18

Post by yelrow »

Missing you already.q
User avatar
RAF96
Posts: 527
Joined: Fri Oct 05, 2018 6:33 am
Location: Dereham, Norfolk, UK
Contact:

Re: Woodworking Advice Please

#19

Post by RAF96 »

I bought some specialist glue in Cyprus.

It expands and foams slightly as it sets and according to the container it is waterproof including sea water.

I bought it as a thin film adhesive to refix outdoor patio tiles that had lifted due to acid rain destroying the Cypriot excuse for normal cement based tile bedding. It was very effective and the tiles never lifted again.

I am sure you could find similar foaming adhesives in UK maybe by 3Ms or Gorilla.
User avatar
IanS
Posts: 926
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Woodworking Advice Please

#20

Post by IanS »

The self same make is available in the UK on *bay
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests