Runaway train........a big one

A place to chat about non railway items. Please observe the forum rules!
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Runaway train........a big one

#1

Post by Walkingthedog »

In the paper today about an iron ore train in Australia travelled more than 90km without a driver at over 100km per hour. It had four locos and 268 wagons. It is suggested it may have had a load of 35,000 tonnes of ore.
Nurse, the screens!
RFS
Posts: 89
Joined: Thu Oct 04, 2018 5:54 pm
Contact:

Re: Runaway train........a big one

#2

Post by RFS »

Robert Smith
User avatar
RogerB
Posts: 1384
Joined: Thu Oct 04, 2018 9:17 pm
Location: Dorset
Contact:

Re: Runaway train........a big one

#3

Post by RogerB »

Saw that. Somehow deliberately, and remotely, derailed after 50 minutes. R-
Young at heart. Slightly older in other parts.
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Runaway train........a big one

#4

Post by Walkingthedog »

Derailed on some points.
Nurse, the screens!
brian1951
Posts: 1274
Joined: Thu Oct 04, 2018 5:52 pm
Contact:

Re: Runaway train........a big one

#5

Post by brian1951 »

No doubt Hornby ones :)
RFS
Posts: 89
Joined: Thu Oct 04, 2018 5:54 pm
Contact:

Re: Runaway train........a big one

#6

Post by RFS »

Driver obviously forgot to put the handbrake on before he got out to check the problem …

The train was deliberately derailed as that was the only way they could stop it.
Robert Smith
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Runaway train........a big one

#7

Post by Walkingthedog »

Yes the detailment was orchestrated at the Perth control centre.
Nurse, the screens!
User avatar
Tinker
Posts: 57
Joined: Fri Oct 05, 2018 9:00 pm
Location: NW Norfolk
Contact:

Re: Runaway train........a big one

#8

Post by Tinker »

My own experience with runaway/unstoppable trains, the first one, come down the incline from Nunhead to St Johns Flyover, came to a stand at the signal at the bottom of the incline, applied the loco brake and released the train brake, signal phone started to ring, got off the loco and a couple yards to the signal, bit of groaning and grinding turn round and the train is moving towards me and ultimately Lewisham station, desperate times require desperate measures, so walk in front of the train and open the train pipe cock, this applied all the brakes and stopped the train, lesson learnt on inclines with 1500 ton trains leave the train brake on.....how any body can jump in front of one is well beyond me after that....as for the reason for this thread, i don't have a clue how or why it happened....
User avatar
Maz066
Posts: 110
Joined: Thu Oct 04, 2018 11:31 pm
Location: Berry NSW Australia
Contact:

Re: Runaway train........a big one

#9

Post by Maz066 »

On the ABC Facebook page they have the result. Complete destruction. The loco was completely buried in iron ore
Peter
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Runaway train........a big one

#10

Post by Walkingthedog »

We’ve seen some film of the wreckage. Now they can sell scrap metal along with the iron ore.
Nurse, the screens!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests