Wykeham - Somewhere in the south!
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Wykeham - Somewhere in the south!
Nice wagons Barry. They look perfect in that setting .
Nurse, the screens!
- teedoubleudee
- Posts: 1116
- Joined: Fri Oct 05, 2018 2:53 pm
- Location: Downham Market
- Contact:
Re: Wykeham - Somewhere in the south!
Lovely scene
Most people are shocked when they find out how bad I am as an electrician
-
- Posts: 908
- Joined: Thu Oct 04, 2018 7:42 pm
- Contact:
- bulleidboy
- Posts: 2299
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Many thanks for the kind comments. It didn't say what make the wagons were in Rails offer - they are Dapol - except for the water tower, these are the first Dapol items on the layout. Best wishes to you all. Barry
Re: Wykeham - Somewhere in the south!
Nice wagons, look very well set in your railway. I was tempted by them but talked my self out of buying, he who hesitates.........
- bulleidboy
- Posts: 2299
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
I have now fitted the Ratio Signal Box Interior and added lighting. A few problems - the signal box came with the floor fitted, and I think the Ratio kit was intended for a "box" that had a little more interior room - so I had to reduce the height of a few items. I have another signal box to fit out sometime in the future, and it has no floor, so it should be possible to fit the Ratio kit to the floor and then raise the floor to the right height - not a problem, in fact should make the job easier. As I had mentioned previously, I lined out the signal box interior, including the roof with bacofoil - to stop light bleed - which it does very effectively - I positioned the light to shine up into the roof, which had had several coats of matt white paint - the led was then given a coat of Tamiya yellow lacquer. Now for some point rodding
IMG_0807 by Barry Clayton, on Flickr
IMG_0806 by Barry Clayton, on Flickr
IMG_0809 by Barry Clayton, on Flickr
IMG_0807 by Barry Clayton, on Flickr
IMG_0806 by Barry Clayton, on Flickr
IMG_0809 by Barry Clayton, on Flickr
Last edited by bulleidboy on Mon Dec 28, 2020 6:02 pm, edited 2 times in total.
Re: Wykeham - Somewhere in the south!
Looking very good Barry.
Are you going to use the Ratio rodding kit?
Are you going to use the Ratio rodding kit?
"Not very stable, but incredibly versatile."
- bulleidboy
- Posts: 2299
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Hi Steve - Yes - I already have it and the extention kit - looks pretty fiddly.
Re: Wykeham - Somewhere in the south!
It is!
I found the there weren’t quite enough parts for what I wanted but I had some plasticard square strips the same dimensions as the square rods. I made extra lengths and drop links by flattening the und with a hammer then bending the squashed bit to the right angle. Can’t tell the difference once painted.
I found the there weren’t quite enough parts for what I wanted but I had some plasticard square strips the same dimensions as the square rods. I made extra lengths and drop links by flattening the und with a hammer then bending the squashed bit to the right angle. Can’t tell the difference once painted.
"Not very stable, but incredibly versatile."
-
- Posts: 908
- Joined: Thu Oct 04, 2018 7:42 pm
- Contact:
Who is online
Users browsing this forum: Bing [Bot] and 0 guests