Wykeham - Somewhere in the south!

Dedicated area to show the community your model railway projects.
User avatar
Walkingthedog
Posts: 4953
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Wykeham - Somewhere in the south!

#411

Post by Walkingthedog »

Nice wagons Barry. They look perfect in that setting .
Nurse, the screens!
User avatar
teedoubleudee
Posts: 1116
Joined: Fri Oct 05, 2018 2:53 pm
Location: Downham Market
Contact:

Re: Wykeham - Somewhere in the south!

#412

Post by teedoubleudee »

Lovely scene
Most people are shocked when they find out how bad I am as an electrician
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: Wykeham - Somewhere in the south!

#413

Post by Bandit Mick »

They really look the part.
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#414

Post by bulleidboy »

Many thanks for the kind comments. It didn't say what make the wagons were in Rails offer - they are Dapol - except for the water tower, these are the first Dapol items on the layout. Best wishes to you all. Barry
Carl L
Posts: 337
Joined: Sun Oct 14, 2018 6:05 pm
Contact:

Re: Wykeham - Somewhere in the south!

#415

Post by Carl L »

Nice wagons, look very well set in your railway. I was tempted by them but talked my self out of buying, he who hesitates.........
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#416

Post by bulleidboy »

I have now fitted the Ratio Signal Box Interior and added lighting. A few problems - the signal box came with the floor fitted, and I think the Ratio kit was intended for a "box" that had a little more interior room - so I had to reduce the height of a few items. I have another signal box to fit out sometime in the future, and it has no floor, so it should be possible to fit the Ratio kit to the floor and then raise the floor to the right height - not a problem, in fact should make the job easier. As I had mentioned previously, I lined out the signal box interior, including the roof with bacofoil - to stop light bleed - which it does very effectively - I positioned the light to shine up into the roof, which had had several coats of matt white paint - the led was then given a coat of Tamiya yellow lacquer. Now for some point rodding :roll:

ImageIMG_0807 by Barry Clayton, on Flickr

ImageIMG_0806 by Barry Clayton, on Flickr

ImageIMG_0809 by Barry Clayton, on Flickr
Last edited by bulleidboy on Mon Dec 28, 2020 6:02 pm, edited 2 times in total.
User avatar
Steve M
Posts: 3443
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Wykeham - Somewhere in the south!

#417

Post by Steve M »

Looking very good Barry.
Are you going to use the Ratio rodding kit?
"Not very stable, but incredibly versatile." ;)
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#418

Post by bulleidboy »

Steve M wrote: Mon Dec 28, 2020 3:48 pm Looking very good Barry.
Are you going to use the Ratio rodding kit?
Hi Steve - Yes - I already have it and the extention kit - looks pretty fiddly.
User avatar
Steve M
Posts: 3443
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Wykeham - Somewhere in the south!

#419

Post by Steve M »

It is!

I found the there weren’t quite enough parts for what I wanted but I had some plasticard square strips the same dimensions as the square rods. I made extra lengths and drop links by flattening the und with a hammer then bending the squashed bit to the right angle. Can’t tell the difference once painted.
"Not very stable, but incredibly versatile." ;)
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: Wykeham - Somewhere in the south!

#420

Post by Bandit Mick »

Lovely lighting effect.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest