Restoring old locos

A place to show what you are building, altering, kit bashing etc.
FattishBoy
Posts: 30
Joined: Sat Nov 24, 2018 7:37 am
Contact:

Restoring old locos

#1

Post by FattishBoy »

Have any of you guys restored old locomotives? I have a few that are over 50 year old most notably an old Triang blue Pullman. Is it possible to get spares and if so where from.
I have managed to get a Wrenn A4 Sir Nigel Gresley running after about 25 year lying in a box, was trying to upload a video but don't know how you do it.
Tony House
Posts: 39
Joined: Sat Nov 10, 2018 6:49 pm
Contact:

Re: Restoring old locos

#2

Post by Tony House »

Hi

The answer to your question is yes.

It all depends on what spares are required for which locomotives of what age.

It will be worth obtaining the service sheet for old Triang, Triang Hornby Hornby Margate and China to match the locos you have, other makers service sheets may be obtainable,

The best thing about older models is they are home repairable.
User avatar
Walkingthedog
Posts: 4983
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Restoring old locos

#3

Post by Walkingthedog »

Some spares are not easily available but are available. Ebay is a good place to look as is Peters Spares and other sites.

https://www.petersspares.com/

https://www.hornbytriangspareparts.co.u ... hop&next=6

https://www.newmodellersshop.co.uk/hornby_spares.htm

Service sheets are available from Lendons.

http://www.lendonsmodelshop.co.uk/index ... heets=none
Nurse, the screens!
User avatar
IanS
Posts: 926
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Restoring old locos

#4

Post by IanS »

One source of 'spares' is ebay where old locos are often sold as 'Spares or repair' - depending on the parts needed it can be economic to buy an old loco with damaged body to use as spares, or a good body with missing wheels or motor.

Many parts are common to locos so buying one type doesn't mean you can use the spares only for the same type.
FattishBoy
Posts: 30
Joined: Sat Nov 24, 2018 7:37 am
Contact:

Re: Restoring old locos

#5

Post by FattishBoy »

Guy's,

Thanks very much for the reply's and advice, after looking up some service sheets to make sure I identified the correct parts I have ordered some spares. I have actually managed to get the motor from the old blue Pullman working(after a bit of soldering to fix a couple of broken wires), I was a bit amazed last time that worked was over 50 years ago it needs a new pickup spring which I have ordered.

Thanks again.

John.
User avatar
dtb
Posts: 393
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

Re: Restoring old locos

#6

Post by dtb »

FattishBoy wrote: Sun Feb 21, 2021 8:14 am was trying to upload a video but don't know how you do it.
best to upload to youtube and share the link back here
example
https://youtu.be/ZOg2YsS2ZlQ
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Restoring old locos

#7

Post by sandy »

Lendons of Cardif has a mountain of spare parts.
But but often robing old scrap locos is good idea. If you can find them.
Sandy
Mountain Goat
Posts: 1539
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: Restoring old locos

#8

Post by Mountain Goat »

I hope that all goes well. One gets a gret feeling when one fixes old locos.
Budget modelling in 0-16.5...
FattishBoy
Posts: 30
Joined: Sat Nov 24, 2018 7:37 am
Contact:

Re: Restoring old locos

#9

Post by FattishBoy »

Mountain Goat wrote: Mon Feb 22, 2021 6:32 pm I hope that all goes well. One gets a gret feeling when one fixes old locos.
I shall let you know how it goes.
Mountain Goat
Posts: 1539
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: Restoring old locos

#10

Post by Mountain Goat »

I am slowly working on a loco chassis that I hope to get working. I plan to adapt an 0-6-0 to become an 0-4-0.
Budget modelling in 0-16.5...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests