dcc decoders

[bobclifford1953]

hi i have a dean goods tender which i want to dcc but the standard decoders are to big and also i want to dcc my two terriers can anyone recommend a decently priced decoder to fit these locos which are not dcc ready and will be hard wired to fit regards bob

Mod: Post moved to the DCC section where it should receive more views.

[darkscot]

I have fitted Digitrax controllers to small engines with no problem. I believe some Zen models are also very small.

[BromsMods]

You could try TCS M1 decoders which were designed for N gauge or the Z series which were designed for Z gauge.

[Mike Parkes]

What make of Dean Goods is it - googling the make/ model plus DCC conversion usually throws up an article or two.

[bobclifford1953]

hornby dean goods just require a small enough decoder to fit into the tender drive no room in the loco thanks bob

[Mike Parkes]

As BromMods suggested a TCS M1 https://uk.tcsdcc.com/m1/ will do the trick but it has to located in the loco as shown here https://tcsdcc.com/installation/ho-scale/1313