Painting and Weathering Service

[Steve M]

I completed the other project this morning - repairing some glue damage and renumbering an LMS Black 5.

20210318_140912 by Steve Mumford, on Flickr

I removed the old numbers and carefully sanded down the traces of glue, then resprayed the cabsides and roof inside the red lining. The smokebox received a coat of weathered black to simulate heat discoloration.

20210319_144347 by Steve Mumford, on Flickr

New numbers applied, along with shed plate and smokebox numbers and an overall coat of satin varnish to tie it all together.
Unfortunately the glue used on the cab had discolored the cab windows so new windows were made from some spare Perspex.
Also added the brake rodding and front steps and repaired the fallplate

20210323_115212 by Steve Mumford, on Flickr

20210323_115141 by Steve Mumford, on Flickr

[Mr Bones]

Really nice. Great job....

[sandy]

Only just seen the pictures of the finnished tenders. Wow.. They look fantastic Steve. I cant wait seeing them back on their chassis cuppled up to the loco.

[Steve M]

They’re already in the post Sandy.

[Hound Dog]

Another fine job Steve..........you are certainly putting the hours in at the moment between fine detailed work like this, to wood-working and layout planning - exhausted watching you, but admiring the progress and quality throughout.

[dtb]

Wow fabulous work Steve, looks fantastic

[Steve M]

Next project.

I’ve been servicing a few old locos for a friend and have convinced him that his Wrenn 2-6-4T deserves repainting. It started life as the LMS version but had been repainted (with Humbrol enamel) into GWR livery. Wrenn did produce the loco in that colour scheme so although not prototypical, it’s not ‘wrong’ to repaint in green.

The paint has been stripped using Mr Muscle oven cleaner - two hours in a plastic bag brought it back to this condition. It’s having a second dose on the top of the side tanks to get into some of the moulded detail and will then get a coat of primer.

Final colours will be GWR green and two shades of black before the transfers are applied. Trying a new approach with them as I have ordered a bespoke set of 3D printed water slide numberplates - number 8320 as originally used by Wrenn.

2021-08-18_04-25-39 by Steve Mumford, on Flickr

[Walkingthedog]

Looking forward to the end result Steve.

[Brian]

Hi Steve
That's a project and a half!
I too look forward to seeing the end result

[RogerB]

You just know there’s a masterpiece in the making. Look forward to seeing more. R-