Hamdden Railway Co.

Dedicated area to show the community your model railway projects.
User avatar
IanS
Posts: 925
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Hamdden Railway Co.

#21

Post by IanS »

Assuming it is all 00 gauge track, then it is likely to be compatible with the rest of the track in the box. Peco, Hornby and Bachmann track in 00 settrack versions are all compatible providing they're code 100. Old steel track can cause problems due to rust but can be located by the magnet test!

Best look to see what is there then ask specific questions however as there are many more makes of track, especially HO that are the same gauge but more difficult to integrate.

Good luck!
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hamdden Railway Co.

#22

Post by Journeyman »

IanS wrote: Mon Apr 05, 2021 1:31 pm Assuming it is all 00 gauge track, then it is likely to be compatible with the rest of the track in the box. Peco, Hornby and Bachmann track in 00 settrack versions are all compatible providing they're code 100. Old steel track can cause problems due to rust but can be located by the magnet test!

Best look to see what is there then ask specific questions however as there are many more makes of track, especially HO that are the same gauge but more difficult to integrate.

Good luck!
Thanks Ian that’s good to know, will look out for any HO.
Presumably steel track can be cleaned up and will work as long as it’s cleaned regularly?
With the bikes and outboards I use a maintenance flued to stop rust, it also works as a switch cleaner I’m thinking it should work on the track.

Dave.
User avatar
RogerB
Posts: 1379
Joined: Thu Oct 04, 2018 9:17 pm
Location: Dorset
Contact:

Re: Hamdden Railway Co.

#23

Post by RogerB »

Check what your cleaner does to a piece of gash track first, particularly any effect it may have on the sleepers. R-
Young at heart. Slightly older in other parts.
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hamdden Railway Co.

#24

Post by Journeyman »

Cheers Roger, I’ll select a piece of gash track and use it for experimenting, lots of things to try out on it such as ballasting, painting etc.

Dave.
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hamdden Railway Co.

#25

Post by Journeyman »

A lovely dry evening so out with the folding horses and ripped out most of the timber for the base.
Railway 009.jpg
Back on the bench the “L” beams are screwed and glued.
Railway 010.jpg
Legs are likewise screwed and glued with blocking to take the Casters.
Railway 011.jpg
Next thing mark it all out on the bench then assemble in the spare room.

What do you guys call the room with the railway in?
Dave.
User avatar
teedoubleudee
Posts: 1116
Joined: Fri Oct 05, 2018 2:53 pm
Location: Downham Market
Contact:

Re: Hamdden Railway Co.

#26

Post by teedoubleudee »

I call mine the Railway Room
Most people are shocked when they find out how bad I am as an electrician
User avatar
IanS
Posts: 925
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Hamdden Railway Co.

#27

Post by IanS »

Mines either called "the garage" or "the train room" :D
Carl L
Posts: 337
Joined: Sun Oct 14, 2018 6:05 pm
Contact:

Re: Hamdden Railway Co.

#28

Post by Carl L »

Paradise!

Tidy looking woodworking, nice one.
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hamdden Railway Co.

#29

Post by Journeyman »

Cheers teedoubleudee, Ian, good one Carl and thanks :)
.
Here it is set up, though it’s hard to get far enough back to get a good photo I’m pleased with the casters, will make it very easy to work around it.
Railway 014.jpg
Railway 016.jpg
Waiting on the track now so will be a while before the next instalment

Dave.
Puddles
Posts: 306
Joined: Sun Oct 14, 2018 12:00 pm
Location: West Sussex
Contact:

Re: Hamdden Railway Co.

#30

Post by Puddles »

Hello journeyman
I see you have a couple of castors that have wheel locks, good idea to fit them as you don’t what the layout to keep moving about when you are stretching over to do some work on it. Take forever if you had to chase it around the room :D looks like a good bit of sturdy carpentry you have done looking forward to seeing the track go down.

Puddles
It does not take me long to do five minutes work.
Nostalgia is not what it used to be.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest