Track saw

Suggest or recommend suitable tools for use in constructing your model railway.
Tricky Dicky
Posts: 388
Joined: Fri Oct 05, 2018 6:49 pm
Contact:

Re: Track saw

#11

Post by Tricky Dicky »

sandy wrote: Mon Jan 10, 2022 11:47 am Seems a lot of money to spend on a job that can be done with a 4ft level a pencel & tape measure. :D
That’s how I did it in the past but once you use a track saw it is a whole level of accuracy better. Mine came with two 1.5m tracks that can be linked together I can now split an 8’ X 4’ sheet of ply length ways with a high degree of accuracy something impossible to do with my previous professional circular saw certainly with any kind of accuracy.

Richard
Last edited by Tricky Dicky on Mon Jan 10, 2022 2:53 pm, edited 1 time in total.
User avatar
Walkingthedog
Posts: 4978
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track saw

#12

Post by Walkingthedog »

There is never a reason not to buy a tool of any type.
Nurse, the screens!
Tricky Dicky
Posts: 388
Joined: Fri Oct 05, 2018 6:49 pm
Contact:

Re: Track saw

#13

Post by Tricky Dicky »

Walkingthedog wrote: Mon Jan 10, 2022 1:18 pm There is never a reason not to buy a tool of any type.

Totally agree :D

Richard
User avatar
Steve M
Posts: 3464
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Track saw

#14

Post by Steve M »

The results of my labours.

Image2022-01-10_02-13-23 by Steve Mumford, on Flickr

You can never have enough tools, but equally, you can never have enough sheds to store them in. :D
"Not very stable, but incredibly versatile." ;)
User avatar
Walkingthedog
Posts: 4978
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track saw

#15

Post by Walkingthedog »

Good Job. By the way Steve, your paint shaker, is it any good?
Nurse, the screens!
Tricky Dicky
Posts: 388
Joined: Fri Oct 05, 2018 6:49 pm
Contact:

Re: Track saw

#16

Post by Tricky Dicky »

If you have a garden then it is regulation to have a shed or two, or three never throw anything away, store it in a shed. A week after you have thrown something away you can guarantee you will need it.

Richard
User avatar
Walkingthedog
Posts: 4978
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track saw

#17

Post by Walkingthedog »

Correct. For years I had a single 15 inch hinge in my workshop/shed and decided finally to get rid of it, what good is a single hinge. Next day the bin was emptied and that afternoon the bottom hinge on the shed snapped. No comment.
Nurse, the screens!
User avatar
Steve M
Posts: 3464
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Track saw

#18

Post by Steve M »

Walkingthedog wrote: Mon Jan 10, 2022 2:51 pm Good Job. By the way Steve, your paint shaker, is it any good?
It works well for the dropper bottles, but I also add two small ball bearings to each bottle to act as agitators - same principle as ‘rattle can’ sprays.
For the few pots of paint that I have, I use one of those paint stirring machines - like a whisk.

The shaker is a very cheap nail varnish shaker from Amazon - be careful when choosing one as some are in very effeminate colors. :)
"Not very stable, but incredibly versatile." ;)
User avatar
Walkingthedog
Posts: 4978
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Track saw

#19

Post by Walkingthedog »

Effeminate colours indeed. I’ll look out for them.
Nurse, the screens!
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Track saw

#20

Post by sandy »

Tricky Dicky wrote: Mon Jan 10, 2022 1:22 pm
Walkingthedog wrote: Mon Jan 10, 2022 1:18 pm There is never a reason not to buy a tool of any type.

Totally agree :D

Richard
There is one reason. Cash shortage. :D
Sandy
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest