I’ve amended it to the safer of the two available settings - you get a choice between ‘safe’ and ‘moderate’, with the latter being the Flickr default setting.
WEST ORTON
Re: WEST ORTON
"Not very stable, but incredibly versatile."
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: WEST ORTON
I’ve only gone and done it.
Well, on this side of the layout anyway. Fitted and connected the four servos to the double bracket.
All the signals on this side, apart from a couple of fixed distant, all work albeit there is some adjustment and fettling to do until I’m completely satisfied.
20220713_201309 by Steve Mumford, on Flickr
20220713_201255 by Steve Mumford, on Flickr
And a somewhat disappointing video that does not reflect the work so far.
https://youtu.be/8rzwTtoo0eA
Well, on this side of the layout anyway. Fitted and connected the four servos to the double bracket.
All the signals on this side, apart from a couple of fixed distant, all work albeit there is some adjustment and fettling to do until I’m completely satisfied.
20220713_201309 by Steve Mumford, on Flickr
20220713_201255 by Steve Mumford, on Flickr
And a somewhat disappointing video that does not reflect the work so far.
https://youtu.be/8rzwTtoo0eA
"Not very stable, but incredibly versatile."
- bulleidboy
- Posts: 2298
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: WEST ORTON
Video worked first time for me - nice clear picture - very impressive. The signals also look very good - you put a lot of work, and fiddly work at that - you must have the patience of a saint.
Re: WEST ORTON
Not so sure about patience, enough OCD to attract the attention of the authorities though.bulleidboy wrote: ↑Thu Jul 14, 2022 8:09 am Video worked first time for me - nice clear picture - very impressive. The signals also look very good - you put a lot of work, and fiddly work at that - you must have the patience of a saint.
Yes Barry, very fiddly although by working on these as a batch, you quickly learn what works and what doesn’t. The biggest challenge comes from the signals towards the rear of the layout - the servos face the wrong way so you are working by feel and there’s no space to get your fingers in.
I’m now thinking about the signals on the other side of the layout where the branch and mainlines pass the MPD. It looks as though there will be four brackets and they are all along the back of the board!
To get access I will need to move two long shelves under the board and relocate the sliding workbench - I picked a good warm weekend for woodwork.
At least I have finished this version of the control panel.
2022-07-14_12-34-49 by Steve Mumford, on Flickr
"Not very stable, but incredibly versatile."
Who is online
Users browsing this forum: No registered users and 3 guests