OO gauge turntables

Help with designing your track work
Buffer Stop
Posts: 104
Joined: Wed Jul 28, 2021 3:10 pm
Contact:

Re: OO gauge turntables

#11

Post by Buffer Stop »

The Peco turntable is certainly worth considering, but my carpentry skills just aren't up to snuff. It will be the Hornby turntable, for better or worse, once I've constructed a small extension section for my baseboard to accommodate it.

One question please. I'm having a mental block. I'll be using a 12v DC feed to operate the motor, rather than the convoluted Hornby wiring. No issue there, but the turnable will only turn in one direction. What sort of switch would I need to allow me to operate the unit in either direction please? I just can't visualise it. The joys of advancing decrepitude, no doubt! Something that will swap the 12V connections is the answer, but as for the switch?

Cheers, Clem
User avatar
Rog (RJ)
Posts: 553
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: OO gauge turntables

#12

Post by Rog (RJ) »

You need a double pole double throw switch. See https://www.eleinmec.com/article.asp?12 for wiring details.
User avatar
Brian
Posts: 2214
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: OO gauge turntables

#13

Post by Brian »

In addition, you would be best obtaining a Centre Off DPDT switch. :D
Image << Click the Icon to go to my website
Buffer Stop
Posts: 104
Joined: Wed Jul 28, 2021 3:10 pm
Contact:

Re: OO gauge turntables

#14

Post by Buffer Stop »

Thanks for the replies. I did suspect a DPDT switch, but just couldn't quite visualise the wiring. Where's the best place to buy a DPDT switch with centre off please?

The other thing that I was wondering was whether I could construct something using Peco PL* switches. I ask, as I've used these to control my points and isolating track sections, and have a couple of free slots available in one of the switch carriers. Could I put something together using a couple of PL-26 switches, or am I just making life too complicated for myself?

Cheers, Clem
User avatar
Brian
Posts: 2214
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: OO gauge turntables

#15

Post by Brian »

Hi
Bitsbox sell DPDT C/O toggle switches for £1.58 plus P & P https://www.bitsbox.co.uk/index.php?mai ... cts_id=879

Brimal are £1.67 plus P & P https://www.bclstore.co.uk/product-page ... -on-off-on

Gaugemaster for a whopping £5.25 plus P & P https://www.gaugemasterretail.com/magen ... ttts2.html

The Peco PL-26 in not suitable, as its a passing contact lever usually used for Solenoid point motors and is SPDT but momentary, so its (On)-Off-(On) where the bracketed (On) is just a momentary closed contact. :o
Image << Click the Icon to go to my website
Buffer Stop
Posts: 104
Joined: Wed Jul 28, 2021 3:10 pm
Contact:

Re: OO gauge turntables

#16

Post by Buffer Stop »

Cheers. I'll check them out.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests