Wykeham - Somewhere in the south!

Dedicated area to show the community your model railway projects.
User avatar
Steve M
Posts: 3441
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Wykeham - Somewhere in the south!

#811

Post by Steve M »

bulleidboy wrote: Mon Sep 05, 2022 11:11 pm Steve - it was the Scalecast site I was looking at. They do look promising - serious food for thought.
I used a Scalecast mould set for the engine sheds I built last year - very good product once you get the hang of using them. They tend to use plaster for the casts although, as you know, I preferred to use resin. Plaster may be a bit trickier to paint, maybe?
Should you decide to proceed, and go with resin, let me know and I will happily give you a few tips and a relatively inexpensive supplier of materials.
I think their wall kit is about £30 with 2kg resin a similar price - quantities depend on the depth of the mould but you can add inert fillers to the resin mix to pad them out a little and stretch the resin a little further.

Also, once you're finished with the moulds, you can always sell them on eBay to recoup the initial outlay.
"Not very stable, but incredibly versatile." ;)
User avatar
bulleidboy
Posts: 2294
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#812

Post by bulleidboy »

I watched both of the Scalecast instructional videos on using both plaster and resin. It looked relatively straightforward. I'll let you know what I decide to do and thanks for the offers.
User avatar
bulleidboy
Posts: 2294
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#813

Post by bulleidboy »

A couple of short videos.
The first clip shows the Class 205 "Thumper" unit. Which obviously has a bad pick-up a the lights are flickering - had this been a SR Electric unit, it would have been fine - I remember in the early sixties the lights would often go out as we crossed the multitude of points outside Waterloo Station.

I am awaiting the Scalecast retaining wall moulds - then hopefully the Metcalfe retaining wall will be replaced with a more detailed wall - twenty four panels required :o

ImageIMG_1360 by Barry Clayton, on Flickr

ImageIMG_1358 by Barry Clayton, on Flickr
User avatar
Walkingthedog
Posts: 4951
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Wykeham - Somewhere in the south!

#814

Post by Walkingthedog »

Really evocative Barry. Although the lights flickered the rear red light was steady.
Nurse, the screens!
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: Wykeham - Somewhere in the south!

#815

Post by Bandit Mick »

Lovely! Very evocative when lit up.
Hound Dog
Posts: 469
Joined: Thu Oct 04, 2018 7:46 pm
Location: Ayrshire
Contact:

Re: Wykeham - Somewhere in the south!

#816

Post by Hound Dog »

Very atmospheric Barry - love these night-time scenes on your layout as the lighting is just spot-on...........thank goodness the lights were flickering and not on permanently, as I fear I would have been blinded by the reflection off the super-clean track - LOL.

Cheers Richard
User avatar
bulleidboy
Posts: 2294
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#817

Post by bulleidboy »

A new addition to the Wykeham stable. It looks very nice, superbly packed by Hornby - we could have played Pass the Parcel for thirty minutes :lol:

ImageIMG_1375 by Barry Clayton, on Flickr
User avatar
Walkingthedog
Posts: 4951
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Wykeham - Somewhere in the south!

#818

Post by Walkingthedog »

Very nice Barry. I had the previous version. Ran beautifully.
Nurse, the screens!
User avatar
Chops
Posts: 1098
Joined: Sat Oct 06, 2018 8:11 am
Location: El Paso, Texas USA
Contact:

Re: Wykeham - Somewhere in the south!

#819

Post by Chops »

Spectacular. Note to self: low relief retaining wall.
User avatar
bulleidboy
Posts: 2294
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#820

Post by bulleidboy »

Since seeing a Postman in one of glencairns photographs, I have been looking for one. Modelu have recently introduced a range of them (I only picked-up on it yesterday). So I ordered one at 10.50am yesterday, and would you believe it arrived in the post at 10.50am today. So top marks to Modelu and the Post Office for a first class service. Picture when painted and positioned. Still awaiting the painter. :lol:

ImageIMG_1379 by Barry Clayton, on Flickr
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 2 guests