Please excuse the newbie question, new to Model railways and DCC this year !
If I was to get a Zimo sound decoder, how would I load loco specific sound packs on to it ?
At the moment searching has only provided one answer .. a £200 Zimo specific piece of hardware.
Could this not be done with a sprog 2 and JMRI ?
Loading sound files onto Zimo Decoder.
Re: Loading sound files onto Zimo Decoder.
you generally buy the decoder with a loco sound pre loaded, check out www.youchoos.co.uk who offer zimo decoders with their sound files pre loaded. Just pick the decoder you require with the desired sound. I have used this site many times and John is really helpful with any questions.
Re: Loading sound files onto Zimo Decoder.
To answer your question .... The only way to add sound files to a sound decoder is via a specialist piece of equipment that allows sound files to be added. There are several makes, but they all cost a considerable amount. Hence as stated, its usual to buy the sound decoder pre-loaded with the correct type of sounds needed.
Re: Loading sound files onto Zimo Decoder.
As has already bern stated, you usually buy the decoder with a sound project already installed. If want to load sound files to a Zimo MS decoder yourself this can be done with a Z21 controller if you are lucky enough to use one of these. It is loaded using the Z21 Maintenance app. You don't need any specialist equipment for this method.
Who is online
Users browsing this forum: No registered users and 0 guests