Silly mistakes.

Post Reply
Allan70
Posts: 8
Joined: Thu Dec 14, 2023 8:57 am
Contact:

Silly mistakes.

#1

Post by Allan70 »

Hi, I have been building my 6x4 N Gauge now for a few months and preparing it for DCC. I have now started the exciting part of making and adding the scenery etc. However, yesterday I put a loco on the track and with the old DC controller I ran an engine to see how the track performs. This is the silly mistake that I made, As the loco went over the points it derailed checked the points and thought hang on those points are brand new and I can not see a problem. So time went on, and I could see no reason for a derail. Then I noticed that at the end of the platform and by the side of the points I had installed some nice looking fencing. AS the loco came on the points is where the fence stopped, The loco was hitting the fence and derailing, so after quite a while I found the "stupid " mistake that I had made the fence was too close to the track.
User avatar
Rog (RJ)
Posts: 559
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: Silly mistakes.

#2

Post by Rog (RJ) »

I think We've all done something Similar in the past. Just one of the things that makes the hobby interesting. It would be a bit boring if everything worked worked out right first time
User avatar
Walkingthedog
Posts: 4983
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Silly mistakes.

#3

Post by Walkingthedog »

Not silly at all. I once glued down a length of platform too close.
Nurse, the screens!
User avatar
Steve M
Posts: 3473
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Silly mistakes.

#4

Post by Steve M »

I always believed regular ba**s ups were compulsory. :?
"Not very stable, but incredibly versatile." ;)
User avatar
yelrow
Posts: 954
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgundy, France
Contact:

Re: Silly mistakes.

#5

Post by yelrow »

mine will start when HM 6000, arrives. Ordered to keep my mind active. This Blue tooth thingy is a mystery to me, and probably will remain so. Its the locos i feel sorry for. They wont know whats hit them.
cheshire lines
Posts: 398
Joined: Tue Oct 09, 2018 4:40 pm
Contact:

Re: Silly mistakes.

#6

Post by cheshire lines »

I guess we've all had experience of things fouling against lineside structures.

Mine was one of my longest coaches catching the ladder of a signal gantry when using the curved crossover in my station area.
glencairn
Posts: 1573
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: Silly mistakes.

#7

Post by glencairn »

Ah! One of the first things we read is make sure the longest locomotive/carriage/rolling stock can safely travel around the track.

Then a derailment, we blame the locomotive. It must be, because everything else runs smoothly.

Proving that what we read, we sometimes ignore. :oops:

Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
User avatar
Walkingthedog
Posts: 4983
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Silly mistakes.

#8

Post by Walkingthedog »

Trouble starts when you buy an even longer loco or carriage.
Nurse, the screens!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests