Wykeham - Somewhere in the south!

Dedicated area to show the community your model railway projects.
User avatar
Walkingthedog
Posts: 4953
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Wykeham - Somewhere in the south!

#1081

Post by Walkingthedog »

Not if you get enough speed up.
Nurse, the screens!
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#1082

Post by bulleidboy »

I have a serious predicament :o Not model railway related, but it most certainly affects Wykeham. In 2022 we had all of the double glazing on the front of the house renewed. It is now the turn for the back of the house. Double glazing is now installed from the inside, not the outside as it was many years ago. It will not be possible to renew the railway room window without removing the layout board that runs across the window together with my control desk. SWMBO is fairly relaxed as to whether this window is replaced or not, and accepts it would be a major disruption to the layout - it could of course be done some other time. What would you do?
glencairn
Posts: 1567
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: Wykeham - Somewhere in the south!

#1083

Post by glencairn »

I think you have already answered it. Do it another time.

I was in the same predicament just before Covid. Doing mine 'another time'.

Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
User avatar
RogerB
Posts: 1379
Joined: Thu Oct 04, 2018 9:17 pm
Location: Dorset
Contact:

Re: Wykeham - Somewhere in the south!

#1084

Post by RogerB »

Ask installer if there is any way it can be done from outside.
Ask another installer.
Pour a whisky and remove baseboard etc,
Put it off until it needs to be done.
Pour another whisky.
R-
Young at heart. Slightly older in other parts.
User avatar
Walkingthedog
Posts: 4953
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Wykeham - Somewhere in the south!

#1085

Post by Walkingthedog »

If SWMBO is happy to leave it and it won’t affect your brownie points then leave it.
Nurse, the screens!
User avatar
Steve M
Posts: 3443
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Wykeham - Somewhere in the south!

#1086

Post by Steve M »

There is another option.
Remove the board, fit a bay window and extend the layout into the bay.
I’ll see myself out.
"Not very stable, but incredibly versatile." ;)
cheshire lines
Posts: 392
Joined: Tue Oct 09, 2018 4:40 pm
Contact:

Re: Wykeham - Somewhere in the south!

#1087

Post by cheshire lines »

Could you just have new units fitted to the existing frames from outside?
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#1088

Post by bulleidboy »

cheshire lines wrote: Tue Jan 30, 2024 4:12 pm Could you just have new units fitted to the existing frames from outside?
New windows are now fitted from the inside as a security measure. It is possible to remove an old double glazed unit from the outside - unlikely to happen, but it can be done very easily and quickly.
User avatar
bulleidboy
Posts: 2299
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Wykeham - Somewhere in the south!

#1089

Post by bulleidboy »

The decision has been made and the window will be replaced. This does give me a chance to remedy one or two things where I can no longer reach with boards in situ. I am also looking and considering how I can make point operation simpler - perhaps with less wire. One of the biggest problems is removing the two kitchen base units that sit under the boards that are both crammed with "stuff". Watch this space.
User avatar
Steve M
Posts: 3443
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Wykeham - Somewhere in the south!

#1090

Post by Steve M »

'Thoughts and prayers' Barry. :D
"Not very stable, but incredibly versatile." ;)
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 5 guests