Adding Lights to a DCC Loco

Post Reply
lardenr
Posts: 29
Joined: Sat Oct 12, 2019 8:03 am
Contact:

Adding Lights to a DCC Loco

#1

Post by lardenr »

Hi all,

I have a Hornby Class 55 St Paddy loco. It's quite basic, so I have decided to make it a bit more realistic, so painting panels, ect. However I would like to add led lights to this, starting with the main headlamps. So to start with on each end there will be 2 main beams As in the image I have posted here. I have bought some led lights 3v (warm) and also I have plenty of resistors as well. I was thinking of creating a little circuit board and then wire them to these. Does anyone know of a definitive guide for this, I have an idea how to do, but there is always bound to be a much better way. Or if there is a book someone could recommend. Many thanks in Adavance. Richard
Image
User avatar
bulleidboy
Posts: 2294
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Adding Lights to a DCC Loco

#2

Post by bulleidboy »

Hi Richard - Have a look at Illuminated Models site. I cannot see that he does a kit for a Class 55, but he does appear to sell a number of "bits and pieces", which might be of help. He also has a number of YouTube videos regarding installations - might be helpful?
This is not an Illum.Models video, but it's a fairly comprehensive "how to".

https://www.youtube.com/watch?v=wij8u2s6pks
lardenr
Posts: 29
Joined: Sat Oct 12, 2019 8:03 am
Contact:

Re: Adding Lights to a DCC Loco

#3

Post by lardenr »

Great, many thanks, I will check that out.
Richard
User avatar
cadman
Posts: 115
Joined: Thu Oct 04, 2018 6:37 pm
Location: Leighton Buzzard
Contact:

Re: Adding Lights to a DCC Loco

#4

Post by cadman »

LaisDCC.com make a LED resistor board ready to solder the wires to.
Sorry I'm late but I couldn't get my flip-flops to work :roll:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests