Four Bridges

Dedicated area to show the community your model railway projects.
Post Reply
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#41

Post by andy757 »

The platform edges are made by Greenwood Laser Designs. The track was laid first and I'll cut balsa to size for the platforms themselves so essentially "made to measure".
User avatar
Mr Bones
Posts: 692
Joined: Sun Oct 14, 2018 9:24 pm
Location: Canterbury Area
Contact:

Re: Four Bridges

#42

Post by Mr Bones »

Just had a look at their site. They have some nice stuff there.
And the Lord said unto John “Come forth and receive eternal life”, but John came fifth and won a toaster!
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#43

Post by andy757 »

This week I am finishing off the other half of the workshop roof underside and cladding it with 5" x 1" boards. Each board is 114" long and screwed to the roof joists.

Subject to how harsh the winter becomes, I may lag the gaps between the boards and the steel roof sheets for added insulation but I suspect it won't be necessary.

One half is already finished https://www.flickr.com/photos/16113522@ ... 412493020/
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#44

Post by andy757 »

Finished the roof work so now I can spend more time on the layout itself and get some progress made :D
https://www.flickr.com/photos/16113522@ ... ed-friend/
User avatar
RogerB
Posts: 1380
Joined: Thu Oct 04, 2018 9:17 pm
Location: Dorset
Contact:

Re: Four Bridges

#45

Post by RogerB »

Looks very good Andy. R-
Young at heart. Slightly older in other parts.
glencairn
Posts: 1567
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: Four Bridges

#46

Post by glencairn »

Looking first class. well done.

Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#47

Post by andy757 »

Made a start on wiring in the platform lights as well as lights for the 3 signal boxes, buildings etc. I want to get this out of the way first before I start any scenic work and ballasting. I'm not convinced the platform lights are the right size so have ordered some others for comparison. The ones I have look too big.
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#48

Post by andy757 »

Having said the above I seem to have got myself into a pickle with the wiring. I have the platform and signal box lights working on one switch but when I wire up a building light in the same way, it doesn't work. The light itself works as I have tested it.

Does anyone have a simple "how to" wiring diagram for 12v lights ?
User avatar
Walkingthedog
Posts: 4953
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Four Bridges

#49

Post by Walkingthedog »

Are they LEDs. They only work in one direction. Positive and negative have to be the correct way round.
Nurse, the screens!
User avatar
andy757
Posts: 120
Joined: Sat Oct 06, 2018 8:24 pm
Location: Lincolnshire countryside
Contact:

Re: Four Bridges

#50

Post by andy757 »

They are not LED's. Grain of wheat bulbs are used throughout, or will be.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests