Hello from West Wales.

Just joined, say 'Hello' in here
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hello from West Wales.

#11

Post by Journeyman »

teedoubleudee wrote: Thu Mar 11, 2021 8:27 am Like this one. Welcome Journeyman.
https://www.hattons.co.uk/25050/hornby_ ... etail.aspx
Yes that’s the one! Thank’s for going to the trouble of finding it very helpful.
darkscot wrote: Thu Mar 11, 2021 8:34 am Well for me that is the starting point for a nice little shunting layout.
Good idea, I’d like to put in a large stone quarry at one end and at the other end a small coal mine and brick works by a stream, so will be looking at how to set that up with sidings etc.

Thanks to Pboland, bulleidboy, IanS Brian and Bandit Mick for the welcome :)
Mick, industrial grime sounds like me, just the thing!

Dave
Carl L
Posts: 337
Joined: Sun Oct 14, 2018 6:05 pm
Contact:

Re: Hello from West Wales.

#12

Post by Carl L »

And welcome from East Yorkshire, you’ve joined a superb forum, all knowledgeable and helpful. Flood away I would say :D
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Hello from West Wales.

#13

Post by Walkingthedog »

Welcome Journeyman. Great forum.
Nurse, the screens!
User avatar
teedoubleudee
Posts: 1116
Joined: Fri Oct 05, 2018 2:53 pm
Location: Downham Market
Contact:

Re: Hello from West Wales.

#14

Post by teedoubleudee »

If you want a ready made coal mine I have one built into a diarama removed from my previous layout. I'm loathe to break it up as it took some time to build. I have offered it on here before but no takers so far as it is too delicate to send through the post so will need to be collected. Not looking for any money, just want it to be used. Can be seen here:
https://www.youtube.com/watch?v=KrK0pgPF9kg
Most people are shocked when they find out how bad I am as an electrician
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hello from West Wales.

#15

Post by Journeyman »

Hi Carl and walkingthedog as you say the forum is great and very helpful.
teedoubleudee wrote: Thu Mar 11, 2021 11:53 am If you want a ready made coal mine I have one built into a diarama removed from my previous layout. I'm loathe to break it up as it took some time to build. I have offered it on here before but no takers so far as it is too delicate to send through the post so will need to be collected. Not looking for any money, just want it to be used. Can be seen here:
https://www.youtube.com/watch?v=KrK0pgPF9kg
What a generous offer, I’ve just looked at the video and you did an excellent job of the mine but I will turn down your offer.
What I have in mind is to Model the Hook Colliery which was still standing in the early 60's, it was a very small mine with a wooden winding frame and a jumble of old buildings. There was also a brickworks in Johnston with a branch line connecting.
Thanks every one, Dave.
Mountain Goat
Posts: 1537
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: Hello from West Wales.

#16

Post by Mountain Goat »

Bandit Mick wrote: Thu Mar 11, 2021 9:48 am Welcome to the friendly and helpful forum. 0-4-0 - shouts out shunting layout to me. Something industrial and nice and grimy.
Ah. To me it shouts out "7mm narrow gauge conversion" :D
Budget modelling in 0-16.5...
User avatar
Journeyman
Posts: 92
Joined: Wed Mar 10, 2021 6:30 pm
Contact:

Re: Hello from West Wales.

#17

Post by Journeyman »

Mountain Goat wrote: Fri Mar 12, 2021 1:07 am Ah. To me it shouts out "7mm narrow gauge conversion" :D
You are losing me there! I’m told by the book of words that 00 is 8mm so 7mm would be 12.5% different? :?:

Dave.
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Hello from West Wales.

#18

Post by Walkingthedog »

OO scale is 4mm to the foot. O is 7mm.
Nurse, the screens!
User avatar
Stese
Posts: 369
Joined: Thu Oct 04, 2018 9:26 pm
Location: Wrexham, UK
Contact:

Re: Hello from West Wales.

#19

Post by Stese »

Welcome to the forum!
Father, IT Guy, HO/OO Modeler.
Mountain Goat
Posts: 1537
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: Hello from West Wales.

#20

Post by Mountain Goat »

7mm narrow gauge (0-16.5) converted from a Hornby 0-4-0 saddle tank loco. (Loco has not had its buffers and coupling bars fitted yet).
Last edited by Mountain Goat on Fri Mar 12, 2021 10:55 pm, edited 3 times in total.
Budget modelling in 0-16.5...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests