Page 2 of 2

Re: Suitable decoder for Bachmann class 08

Posted: Thu Aug 19, 2021 7:42 pm
by Mountain Goat
The Lenz LE077XF should fit. Its dimentions are L 0.53" x W 0.39" x H 0.14" which is pretty small.

Re: Suitable decoder for Bachmann class 08

Posted: Thu Aug 19, 2021 8:40 pm
by Mike Parkes
The TCS DP2X-UK having rocketed in price in the last few years is now available direct from their new UK outlet at £21 (+ postage) for the basic version
https://uk.tcsdcc.com/dp2x-uk-ka/

Re: Suitable decoder for Bachmann class 08

Posted: Fri Aug 20, 2021 11:54 am
by darkscot
I have taken another look at the situation and there is no way the Zimo MX600R will fit.

So I have ordered a DP2X-UK-KA from TCS. So if it doesn't fit Mr Parkes owes me twenty five quid! ;)

Re: Suitable decoder for Bachmann class 08

Posted: Sat Aug 21, 2021 11:18 am
by Mike Parkes
The DP2X-UK is hardly any bigger than the blanking plug - its the one decoder that will fit a Hornby M7 without having to remove any weights although it does need in that case to be put in the wrong way round to get the body to fit back on - not an issue unless lights are also going to be fitted but does need in that instance CV29 tweaking to correct the direction. When they were cheaper I used them as a standard decoder where Lenz Standards were too big and subsequently swopped some into new locos needing such a small direct fit when other decoders of lesser size than a Lenz Standard were too big.

Re: Suitable decoder for Bachmann class 08

Posted: Tue Aug 24, 2021 12:18 pm
by darkscot
Well the the TCS decoder has arrived and duly fitted. It is quite a bit smaller than the Zimo and I will certainly consider it for future applications. Having the keep alive option is a bonus, but I don't actually think there is space in the 08 for a keep alive.

Image

Image