Wykeham - Somewhere in the south!
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Hi Chops - I'm happy for you to plagiarise whatever you like. The back retaining wall was the Metcalfe kit with ground up charcoal applied with a paint brush. I like the Bachmann walling but to do a good length would be expensive. BB
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
The Redutex road sheets arrived today from Spain (direct from Redutex) - three packs cost £33.00 including postage, and were ordered on the 13th December. A bit more expensive than priced in the UK, but as most of us know, it's rarely available. Redutex had everything in stock. If you want it, you have to pay for it. The road surface has both man-hole covers and kerbside drain covers embossed into the road surface. They even sent me an emailed Christmas card! I'll post a picture once it's laid - not a priority at the moment. Barry
Re: Wykeham - Somewhere in the south!
Look forward to seeing the pictures Barry. It's good stuff. R-
Young at heart. Slightly older in other parts.
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
As I mentioned earlier, I will not be laying the road surface just yet, but when I do I will need some good pavement - any recommendations? The Metcalfe pavement looks to much like bit of cut-up card, Scenecraft do a grey pavement, but again it's just printed on card. Redutex do a sheet that is described as Tarmac, but again, not quite what I want. Not much came up via Google.Barry
Re: Wykeham - Somewhere in the south!
Not quite what you are looking for but I found some laser cut paving (slabs rather than tarmac) on eBay for my N layout. I think the company was called ‘in the greenwood’ or similar..
Looked quite good once painted to look like yorkstone.
I’ll try to find a link.
Looked quite good once painted to look like yorkstone.
I’ll try to find a link.
"Not very stable, but incredibly versatile."
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Thanks Steve - that looks pretty good, particularly the ready-made section. Not expensive, so may give it a try. Barry
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
I was in Hobby Craft yesterday when SWMBO spotted this - Reindeer Moss. It was available in natural (dead?) and green - only £2.50 a box. Ideal for small bushes etc.
I was actually in there to buy a pack of very small drill bits - and found they sell replacement packs - 5-6 x 0.08 and 1mm packs at £5 a pack.
I was actually in there to buy a pack of very small drill bits - and found they sell replacement packs - 5-6 x 0.08 and 1mm packs at £5 a pack.
- bulleidboy
- Posts: 2310
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Ordered today - I'd better get my overalls out!Steve M wrote: ↑Fri Jan 04, 2019 4:53 pm Found it:
https://www.inthegreenwoodlaser.co.uk/c ... oad-paving
Re: Wykeham - Somewhere in the south!
Hope you went for the individual slabs.bulleidboy wrote: ↑Sun Jan 13, 2019 10:56 amOrdered today - I'd better get my overalls out!Steve M wrote: ↑Fri Jan 04, 2019 4:53 pm Found it:
https://www.inthegreenwoodlaser.co.uk/c ... oad-paving
"Not very stable, but incredibly versatile."
Who is online
Users browsing this forum: No registered users and 0 guests