Wykeham - Somewhere in the south!
-
- Posts: 908
- Joined: Thu Oct 04, 2018 7:42 pm
- Contact:
- RSR Engineer
- Posts: 256
- Joined: Sun Oct 07, 2018 11:18 pm
- Location: Freistaat Bayern
- Contact:
Re: Wykeham - Somewhere in the south!
Love the lighting! Just as if the lamps are hanging from the ceiling. Nice one!
Cheers,
Artur
Cheers,
Artur
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Wykeham - Somewhere in the south!
Thanks Barry. You always seem to go just that one step further.
Nurse, the screens!
- bulleidboy
- Posts: 2299
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Thanks for the comments everyone.
Brian - it's that one step that makes it just right - but then again it could be that one step too far! Barry
Brian - it's that one step that makes it just right - but then again it could be that one step too far! Barry
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Wykeham - Somewhere in the south!
I've done that Barry. I wish I had left it as it was.
Nurse, the screens!
Re: Wykeham - Somewhere in the south!
As an earlier post said, a real inspiration, I want so much to move on from ballasting (someone said it gets a bit tedious) and get to building construction. Keep the images coming.
- bulleidboy
- Posts: 2299
- Joined: Thu Oct 04, 2018 6:30 pm
- Location: Basingstoke, Hants
- Contact:
Re: Wykeham - Somewhere in the south!
Hi Carl - no need to rush it. I quite enjoyed the ballasting. It has taken me six years to get to where I am, and still someway to go - and Wykeham is only a 10' x 7' - so not big. BB
- Walkingthedog
- Posts: 4953
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
Re: Wykeham - Somewhere in the south!
I enjoy ballasting, trouble is once I start I can’t stop.
Nurse, the screens!
- teedoubleudee
- Posts: 1116
- Joined: Fri Oct 05, 2018 2:53 pm
- Location: Downham Market
- Contact:
Re: Wykeham - Somewhere in the south!
MasochistWalkingthedog wrote: ↑Fri Nov 20, 2020 4:24 pm I enjoy ballasting, trouble is once I start I can’t stop.
Most people are shocked when they find out how bad I am as an electrician
Re: Wykeham - Somewhere in the south!
Hello,
I use a thin card to make sleepers and when the rail is stuck on and the rail pins inserted I paint the whole lot with a gungy paint mix a sort of nasty grey colour and put the ballast on top of that. I use an old Resin W bottle dilute the glue about 70/30 add a few drops of Fairy liquid, get the nozzle in the right position to give a drop with the amount of squeeze I use. Works very well indeed.
Though I expect this has been said before, apologies if it had.
Cheers - Jim
PS Well yes it is boring
I use a thin card to make sleepers and when the rail is stuck on and the rail pins inserted I paint the whole lot with a gungy paint mix a sort of nasty grey colour and put the ballast on top of that. I use an old Resin W bottle dilute the glue about 70/30 add a few drops of Fairy liquid, get the nozzle in the right position to give a drop with the amount of squeeze I use. Works very well indeed.
Though I expect this has been said before, apologies if it had.
Cheers - Jim
PS Well yes it is boring
Who is online
Users browsing this forum: No registered users and 2 guests