Page 1 of 1
Budget Model Railways PWM controller
Posted: Wed Oct 10, 2018 4:32 pm
by Montfort
Hello,
Has anyone ever tried to build the
Budget Model Railways PWM controller:
https://www.youtube.com/watch?v=T64lhCwN9Ws
All your advices would be very appreciated. Thanks.
Re: Budget Model Railways PWM controller
Posted: Wed Oct 10, 2018 5:51 pm
by IanS
I'm tempted - I'm just starting to make my own board from a computer power supply, I've stripped off the connectors, fastening the PSU to the board (an old kitchen door) and fastened a couple of connector blocks with some of the leads coming out of the PSU.
PSU-breakout3.jpg
Next stage for me is to connect up the rest of the wires and then decide what to plug onto them! One idea is a few PWM controllers, one for each siding for the big layout with 3 running tracks and a number of sidings. I'm not sure yet.
Re: Budget Model Railways PWM controller
Posted: Thu Oct 18, 2018 12:59 pm
by Montfort
Electrical
Hope that helps.
Re: Budget Model Railways PWM controller
Posted: Tue Feb 05, 2019 10:55 pm
by Cliffyg
Just bought a speed controller and power supply.
Using it for powering loco depot.
Mounted in a suitable box, works a treat
