2-10-0 loco
-
- Posts: 23
- Joined: Thu Oct 04, 2018 11:40 pm
- Location: Halfway Sheffield
- Contact:
2-10-0 loco
has graham farish ever done a 2-10-0 loco ( or could it be 4-10-0 ) as you can tell from my question i am still very new to all this
- Walkingthedog
- Posts: 4972
- Joined: Thu Oct 04, 2018 5:51 pm
- Location: HAZLEMERE, BUCKS.
- Contact:
- RSR Engineer
- Posts: 256
- Joined: Sun Oct 07, 2018 11:18 pm
- Location: Freistaat Bayern
- Contact:
Re: 2-10-0 loco
Can't deny, a 4-10-0 would've been very nice. Here's the Bulgarian version:
https://thetransportlibrary.co.uk/index ... 368&page=2
And here's my own:
http://www.kropplenburg.de/rsr/mainpix/n55533bb.jpg
Cheers,
Artur
https://thetransportlibrary.co.uk/index ... 368&page=2
And here's my own:
http://www.kropplenburg.de/rsr/mainpix/n55533bb.jpg
Cheers,
Artur
-
- Posts: 89
- Joined: Sat Oct 06, 2018 1:57 pm
- Contact:
Re: 2-10-0 loco
Minitrix did a very average 9F, 2-10-0, now over 30 yrs old they come up on Ebay and make decent money. I have 2, as well as 2 Dapol models* which are a better model, but both lack the pulling power of the Minitrix version.
In Continental Outline there are several offerings, by Fleischmann, Minitrix and Roco to name a few.
* I have actually had 5 Dapol 9Fs delivered, 3 went back as poor runners, I think their quality control is poor, but they offer easy returns, so don't let that worry you.
In Continental Outline there are several offerings, by Fleischmann, Minitrix and Roco to name a few.
* I have actually had 5 Dapol 9Fs delivered, 3 went back as poor runners, I think their quality control is poor, but they offer easy returns, so don't let that worry you.
Who is online
Users browsing this forum: No registered users and 0 guests