Page 1 of 1

Return to Rail Modelling

Posted: Tue May 26, 2020 11:10 am
by Midlander
Thank you for allowing me to join, I am returning to railway modelling after a break of approx 13 years. Mainly due to my in-laws finally moving out meaning I'm getting space for a layout again. During that time I have been modelling mostly tanks, aircraft and such.
I'm an Aussie and previously I modelled Australian trains with one Amtrak train to run on the local club US based layout. This time around though I am going for the GWR, a railway I have always been fascinated by. My user name is after the train I travelled on quite often as a railway apprentice, The Midlander, one Australian train I would like to still get a model of.

Geoff

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 11:13 am
by Brian
Hi Geoff
A warm welcome to you.
We look forward to reading more layout build details as you progress.

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 11:20 am
by Midlander
Thank you. Still a couple of months, at least, before downstairs is cleared of the in-laws junk. But time to start buying items for it for sure.

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 1:33 pm
by Mr Bones
Welcome to the forum Geoff. Friendly, helpful & like minded bunch on here.
Good luck with the clearing..

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 1:45 pm
by glencairn
Welcome on board, Geoff.

Glencairn

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 2:08 pm
by teedoubleudee
Hi Geoff and welcome to our forum.

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 2:59 pm
by Bandit Mick
Welcome to the friendly and knowledgeable forum Geoff.

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 7:45 pm
by IanS
Welcome - I'm sure you'll have plenty of questions so ask away, there will be plenty of answers to read through!

Re: Return to Rail Modelling

Posted: Tue May 26, 2020 9:29 pm
by bulleidboy
Welcome Geoff - you have joined a great forum. BB

Re: Return to Rail Modelling

Posted: Wed May 27, 2020 3:29 am
by Mountain Goat
Welcome to the forum.