Page 1 of 1
Girder Bridge
Posted: Sun Dec 27, 2020 11:19 am
by Chuffinell
I'm looking for near-ish replica of the attached style. Could be card, downloadable, plastic kit, MDF kit, r-t-r. Near enough would do tbh. 4mm/OO scale. Just the actual steel bridge structure, wing-walls etc not an issue. Thanks in advance for any pointers.
Re: Girder Bridge
Posted: Sun Dec 27, 2020 12:15 pm
by Walkingthedog
Re: Girder Bridge
Posted: Sun Dec 27, 2020 12:19 pm
by Puddles
I made this from a Wills plastic kit SS57 girder plate panels oo gauge. You can make it as long or short as you want,
The central girder support I made from bits left over from the kits.
Puddles
Re: Girder Bridge
Posted: Sun Dec 27, 2020 5:02 pm
by cheshire lines
I've used the Wills SS57 kit too.
Re: Girder Bridge
Posted: Sun Dec 27, 2020 8:00 pm
by Bandit Mick
If you use the scalescenes bridge please post how you got on as I am thinking of giving this one a go - but haven’t used any scalescenes stuff before.
Re: Girder Bridge
Posted: Sun Dec 27, 2020 8:58 pm
by Carl L
Like others, the Wills kit.
Re: Girder Bridge
Posted: Sun Dec 27, 2020 10:46 pm
by Mr Bones
There is always the
Peco Plate Girder Bridge although that one is curved.