Motor Repair

Post Reply
C Markey
Posts: 3
Joined: Tue Nov 19, 2019 12:12 pm
Contact:

Motor Repair

#1

Post by C Markey »

Hi All, I recently purchased a job lot of track and trains off a well known auction web site. cleaned up one of the locos and got it working, but I am scratching my head over the next one. I would appreciate any help. Can I remove the part in yellow !!
Hear are a few of photos.

Image

Image
User avatar
Rog (RJ)
Posts: 553
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: Motor Repair

#2

Post by Rog (RJ) »

You could remove them but you would need to replace them with a length of wire as they are inductors (chokes) which are in series with the motor. Unless they are faulty I would leave them in.
C Markey
Posts: 3
Joined: Tue Nov 19, 2019 12:12 pm
Contact:

Re: Motor Repair

#3

Post by C Markey »

Hi Rog, thanks for getting back, I'll give it a good cleaning and see how it go's, I do think there is a fault somewhere. I'll post back when I've had a go. Thanks again. Chris
C Markey
Posts: 3
Joined: Tue Nov 19, 2019 12:12 pm
Contact:

Re: Motor Repair

#4

Post by C Markey »

Well, got the engine running after a lot of cleaning and freeing up the wheels, ran well for a while then ran very hot.
I removed the choke and ran a wire from pickups to engine and all seems good, it's not going to be the best runner, but for what I payed for the job lot well worth it, plus I enjoyed the experience of sorting it out. Thanks for your help. Chris
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests