Model Railway Forum

Morning neil 60 here On a layout with block detection run by digitrax one rail is not cut but all have droppers now can I connect all those to the black bus wire hope I've mad my self clear .

Hi

AFAIK Digitrax have just the one rail cut and isolated from the next block section and this makes the block area, the other rail is continuous.

Only the continuous rail droppers go to say the ‘red’ bus, the black droppers for the block sections connect to their associated detection device. If you connect them all to the ‘black’ bus you effectively close the breaks.
Edit - your bus colours maybe different of course but the basic principle holds true.

Thank you both for your help on my layout the black wire is at the back and the rail closest to me is the red wire and has the blocks in it I asked because it looks a mess again thank you both.