Model Railway Forum

Hi all

Does anyone know how to remove the body from a Bachmann N Class.

There are at least 5 screws, 2 at each side under the cab, 1 in the centre and 2 under the front bogie.
The loco is shorting and I need to remove the DCC decoder to see if that is the problem firstly.

Thank you

It it this one

https://lendonsmodelshop.co.uk/pdf/Bach ... 02-6-0.pdf

Thanks Brian

Following the lines I assume it's the 2 cab screws, the centre screw and the inner most screw under the front bogie.

That’s what it looks like but whether that is the case who knows.