How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

Post Reply
Tallpaul70
Posts: 229
Joined: Sun Dec 02, 2018 6:49 pm
Contact:

How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

#1

Post by Tallpaul70 »

Hi All,

0In Summer 1962 six or so Standard 2-6-4 Tank Locos in the 80000 number series were allocated to Old Oak Common.

What were these used for?

Were they regarded as, and used as, equivalents to the GWR 61xx tanks, or did they have a specific use?

Many thanks
Best regards
Paul
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

#2

Post by footplate1947 »

The BR 2-6-4s class 4T were use mainly for Local suburban and Commuter traffic........John
If only there was enough hours in the day..................John
Mike Parkes
Posts: 228
Joined: Fri Oct 05, 2018 7:35 pm
Contact:

Re: How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

#3

Post by Mike Parkes »

According to the RCTS book on Standard tank locos 21 Std 4 tanks were transferred to the Western Region in July 1962. The six sent to Old Oak Common were stored although limited use was made of three of them (80070, 80098 and 80131) on ECS duties to Paddington. All six were transferred away by November 1962 to either Cros Newydd or Shrewsbury
Tallpaul70
Posts: 229
Joined: Sun Dec 02, 2018 6:49 pm
Contact:

Re: How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

#4

Post by Tallpaul70 »

Thanks Mike,
To give a bit of variety on the suburban trains on my layout, from 61xxs and class117 DMUs, I might say that a few "tests" of the Standards were made on the Reading trains!

Best regards
Paul
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: How were Old Oak Common's allocation of Standard 2-6-4 Tanks used?

#5

Post by footplate1947 »

That alright paul your welcome. The question was what were they used for I thought. John
If only there was enough hours in the day..................John
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests