dcc concepts decoder

[mickrick]

Can anybody help please.I have a DCC concepts decoder with no other ID.It measures 20mm long and 12mm wide and is a 9 pin device.I need a 9 pin harness for it but have been unable to find one after hours of searching DCC concepts catalogue.I have bought a 9 pin JST style connector(810135) but the connector is too large to fit.any ideas anybody.thanks

[cadman]

Surely this is the correct harness..............HB

[mickrick]

Thanks for info,it may well be the correct one,but it looks identical to the one I purchased.need to know physical size of connector.where was this info you have posted please

[Walkingthedog]

https://www.dccconcepts.com/?s=Decoder+harness

[dtb]

Thanks for info,it may well be the correct one,but it looks identical to the one I purchased.need to know physical size of connector.where was this info you have posted please

from DCC Concepts I think, see link below
https://www.dccconcepts.com/product/dec ... st-3-pack/

[cadman]

From Concepts webpage as already stated..........I have found one in my bits box, the actual plug bit measures 9mm x 2mm..........HB

[mickrick]

Thanks for confirmation that it is the harness that I need,9x2mm connector size was the clincher.thanks for all your help to you all