The Triang and Hornby 0-4-0 Loco Thread.

Post here items relating to Hornby. Including all their subsidiary makes.
glencairn
Posts: 1573
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#21

Post by glencairn »

A slight alteration to a Hornby D Class locomotive.
IMG_4228.JPG
Coal bunker added.
IMG_4229.JPG
Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
glencairn
Posts: 1573
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#22

Post by glencairn »

Cutting away most of the cab of the 0.4.0 locomotives to try and give a 1890/1914 look (hopefully).
IMG_4616.JPG
IMG_4615 (2).JPG
IMG_4617 (2).JPG
Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
Mountain Goat
Posts: 1540
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#23

Post by Mountain Goat »

Interesting. I like it.
Budget modelling in 0-16.5...
glencairn
Posts: 1573
Joined: Sun Jan 06, 2019 10:30 am
Location: Both sides of the Border
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#24

Post by glencairn »

Mountain Goat wrote: Fri Sep 18, 2020 12:34 am Interesting. I like it.
An idea you could try with your locos, maybe, MG?

Glencairn
To the world you are someone. To someone you are the world
I Cannot Afford the Luxury of a Negative Thought.
Mountain Goat
Posts: 1540
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#25

Post by Mountain Goat »

I was thinking of making a cabless 7mm narrow gauge loco.
Budget modelling in 0-16.5...
Buffer Stop
Posts: 104
Joined: Wed Jul 28, 2021 3:10 pm
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#26

Post by Buffer Stop »

hunslet wrote: Mon Nov 19, 2018 3:07 pm I bought this Triang RS24 "Connie" set earlier this year. It was missing the yellow inner divider/spacer so a visit to Hobbycraft found some suitable card and this is the result.

Image

The request for 0-4-0 loco photos did not specify steam only so here are three of my other 0-4-0 locos from Triang/Hornby.

Image

Left to right.
Triang R254 Steeple Cab Electric.
Triang R253 Switcher.
And as Rivarossi is now part of Hornby a Bedoni Electric shunter. The real Bedoni shunters were Diesel only so this is a Fantasy model produced in limited numbers by Rivarossi.

Regards, Colin.
Colin:

I had that very same train set some 50-odd years ago, along a load of other stuff that I added, or was bought for me. I still remember it fondly. I also had one of the companion locos., Polly, as I recall. As for the yellow diesel loco, they were part of the Dock Authority line. I had the model with the red finish, which was marked ‘3’, if memory serves, and the black one, marked ‘5’. They had headlights that would light-up as they moved. I remember the electric loco on the left too. For a time, Tri-ang offered a couple of engines that could draw power from overhead catenary. It was possible to run two locos at the same time, one from the track, the other overhead.

A good line in accessories could be had from Airfix or Merit, as well as Tri-ang/Tri-ang Hornby.

I’m surprised just how much of this stuff has survived the passage of time. I sold my stuff 50-odd years ago, at just about the time that I discovered girls. I wish that I’d kept it all, especially as getting back into the hobby a few months ago, I’m surprised just how expensive everything is. It didn’t seem to be the case when I was a boy.
Mountain Goat
Posts: 1540
Joined: Fri Oct 05, 2018 12:57 pm
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#27

Post by Mountain Goat »

Prices doubled seemingly overnight at about 2005?
A few years on from that and the prices doubled again and have gone up again since. Back around 2005 a Hornby Freightliner wagon could be bought for about £12 new if I recall as I bought a few which I later swapped for secondhand ones so I could get the containers I wanted. Today the RRP Hornby price is £47.99. Not sure what the shops sell them at though as they normally sell for a few pounds less, but it is still quite expensive.

I soon realized with the prices zooming up that I was becoming priced out of the market so I changed scale and gauge so I could keep modelling without the big spend.
Budget modelling in 0-16.5...
hunslet
Posts: 89
Joined: Wed Nov 07, 2018 1:11 pm
Contact:

Re: The Triang and Hornby 0-4-0 Loco Thread.

#28

Post by hunslet »

Connie and Polly seem to be fairly common individually and in sets.
Nellie the original I think is fairly scarce due probably to age.
The set came in a Job lot of Triang and Marklin items together with a large number of Faller buildings which I was more interested in and used them on a small H0e layout mentioned a couple of years ago on this forum.
My 0-4-0 Diesel is from the original Transcontinental range ( no buffers or holes) as I collect Triang Transcontinental models.
There were two overhead electrics in the Transcontinental range , the 0-4-0 steeple cab, Red (dummy pantograph) or Green (working pantograph) . There was also a Double ended Electric B0-B0 in two colour schemes. I think that there were some Australian Multiple units also.
The UK range included a couple of overhead electrics but I do not have any of these.
Regards, Colin.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests