Painting figures

Help with layout scenics
User avatar
RogerB
Posts: 1419
Joined: Thu Oct 04, 2018 9:17 pm
Location: Dorset
Contact:

Re: Painting figures

#11

Post by RogerB »

Yes, I remember you saying that when I first started to have difficulties. When I get round to doing some more I will prime in white first. Also. I remember you saying, it saves painting shirts. :D R-
Young at heart. Slightly older in other parts.
Nine Elms
Posts: 97
Joined: Tue Sep 29, 2020 7:01 pm
Contact:

Re: Painting figures

#12

Post by Nine Elms »

What paint do you guys use? Never painted figures before and thought I would ask.

John
User avatar
Walkingthedog
Posts: 5050
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Painting figures

#13

Post by Walkingthedog »

Humbrol does for me. I also use Railmatch and Phoenix.

Have you ever built and painted Airfix type kits. Same paint as that.
Nurse, the screens!
User avatar
Steve M
Posts: 3596
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Painting figures

#14

Post by Steve M »

Vallejo and RailMatch for me. Humbrol is now available in dropper bottles which are much more economical in use as there is very little wastage.
"Not very stable, but incredibly versatile." ;)
IanAlan
Posts: 472
Joined: Sat Oct 20, 2018 9:55 pm
Location: Essex
Contact:

Re: Painting figures

#15

Post by IanAlan »

I used to use enamel paints, which I didn't prime, but ran out during the first lockdown. I experimented with exterior grey primer that I found in the shed and used 'artists' acrylic paint on top of that. It has stayed on for about 10 months so far, no problem. The thickness of the primer, which I applied with a brush, is not ideal, but the result is okay on plastic figures and scenic features. However, I would not recommend it on anything that needs to be smooth such as locomotives or rolling stock. My son has a set of about 20 artists acrylic colours, which I've borrowed :lol: , and these give a lot of scope for mixing colours.
User avatar
Steve M
Posts: 3596
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Painting figures

#16

Post by Steve M »

Ian, by ‘exterior grey primer’ I assume that to be house paint like Dulux?
If so it’s definitely too thick as it will be ‘heavy’ with pigment.
Automotive primer eg from Halfords is pretty good - all my loco repaints started with that.
"Not very stable, but incredibly versatile." ;)
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: Painting figures

#17

Post by Bandit Mick »

It was my first go at painting figures and used them on M & J Brewery Sidings. After reading advice on the forum I sprayed mine with Halfords grey plastic primer then used cheap artists acrylics for the colours. They seem to have come out quite well. Small brushes and a magnifying glass on a stand helped too.
IanAlan
Posts: 472
Joined: Sat Oct 20, 2018 9:55 pm
Location: Essex
Contact:

Re: Painting figures

#18

Post by IanAlan »

Thanks Steve for the tip about Halfords primer. I'll get some for my next lot of painting. The exterior primer (water-based) was not idea although it did the job. As you said, this kind of exterior house paint (Dulux etc) is too thick to create a smooth surface.

Perhaps I'll finally join the 20th century and treat myself to an airbrush as well :lol: .
User avatar
Steve M
Posts: 3596
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Painting figures

#19

Post by Steve M »

IanAlan wrote: Sat Apr 10, 2021 9:37 pm
Perhaps I'll finally join the 20th century and treat myself to an airbrush as well :lol: .
There will be no holding you back then! :D
"Not very stable, but incredibly versatile." ;)
User avatar
bulleidboy
Posts: 2394
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Painting figures

#20

Post by bulleidboy »

When spraying with Halfords Primer the figures really only need a light coat and given from a distance.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests