Talerddig station

Help with designing your track work
Post Reply
StainesJack
Posts: 1
Joined: Tue Aug 03, 2021 1:03 pm
Contact:

Talerddig station

#1

Post by StainesJack »

Hello Everyone

Can anyone tell me where I can obtain a track and signalling plan of the above station.

I have tried the S R S site without success

Any help would be greatly appreciated

Thanks
Neil
twalton1145
Posts: 114
Joined: Fri Oct 05, 2018 11:47 am
Location: Coldstream, Scottish Borders
Contact:

Re: Talerddig station

#2

Post by twalton1145 »

Not sure if this helps or not, but good luck!
Ted

https://coflein.gov.uk/en/site/43035/
hunslet
Posts: 88
Joined: Wed Nov 07, 2018 1:11 pm
Contact:

Re: Talerddig station

#3

Post by hunslet »

This website has a large scale map which shows Talerddig station, siding and signal post positions in the Cambrian era.

https://www.sabre-roads.org.uk/maps/

From the left hand menu select...
Select a category, Maps hosted by NLS.
Select a layer, O S Six inch.

As the map is not very clear at full size, zoom down a bit , I had to find Welshpool and then follow the Cambrian line South through Newtown to Caersws junction and then North to Talerddig.
When zoomed in it shows the track layout and signal and mileposts.
Hope this helps. Colin.
Simon_100
Posts: 110
Joined: Sun Sep 26, 2021 9:51 am
Location: Catalonia
Contact:

Re: Talerddig station

#4

Post by Simon_100 »

The Lightmoore Press have a series, 'Track Layout Diagrams of the Great Western Railway and BR (WR)' and I reckon Section 60 Aberystwyth to Welshpool will suit you - only £6 too :) It shows the station developing in three iterations: as opened with a single platform in 1891, including the 'new' up platform in 1901 and finally 1989. Sadly the position of the signals don't appear but the accompanying notes are in detail, e.g. that the second platform was installed in 1896 but not opened until 1900, and that the passing loop was extended at both ends in 2011.
Simon_100
Posts: 110
Joined: Sun Sep 26, 2021 9:51 am
Location: Catalonia
Contact:

Re: Talerddig station

#5

Post by Simon_100 »

hunslet wrote: Sun May 15, 2022 2:39 pm This website has a large scale map which shows Talerddig station, siding and signal post positions in the Cambrian era.

https://www.sabre-roads.org.uk/maps/

From the left hand menu select...
Select a category, Maps hosted by NLS.
Select a layer, O S Six inch.

As the map is not very clear at full size, zoom down a bit , I had to find Welshpool and then follow the Cambrian line South through Newtown to Caersws junction and then North to Talerddig.
When zoomed in it shows the track layout and signal and mileposts.
Hope this helps. Colin.
That's a fabulous web site Colin! Not for the first time I wonder if Brian could consider changeing the site's setting to open lonks in new tabs tho' as I kept having to go back to the beginning of the search when I double checked your instructions ...
User avatar
IanS
Posts: 926
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Talerddig station

#6

Post by IanS »

Simon_100 wrote: Tue May 24, 2022 8:46 am That's a fabulous web site Colin! Not for the first time I wonder if Brian could consider changeing the site's setting to open lonks in new tabs tho' as I kept having to go back to the beginning of the search when I double checked your instructions ...
No need, simply right click on the link (on a PC) and it gives the option to open in a new tab.
hunslet
Posts: 88
Joined: Wed Nov 07, 2018 1:11 pm
Contact:

Re: Talerddig station

#7

Post by hunslet »

Glad you found it interesting.
Here's another map site I find useful.
You can compare old and new maps or satellite views side by side with a pointer to show the same position on each map.

https://wtp2.appspot.com/wheresthepath.htm

Chose the required right and left maps from the top menu and search for the location with the binoculars then zoom to the required level.

Hope you find this site useful also.
Colin.
Simon_100
Posts: 110
Joined: Sun Sep 26, 2021 9:51 am
Location: Catalonia
Contact:

Re: Talerddig station

#8

Post by Simon_100 »

IanS wrote: Tue May 24, 2022 9:12 amNo need, simply right click on the link (on a PC) and it gives the option to open in a new tab.
Doh! Typical Mac user me - and it does work on a Mac as long as you have a 'proper' mouse :)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest