I have recently purchased the above second hand and fitted it with a basic hornby decoder.the running is proving very erratic,stopping and creeping at various areas on the layout.
When googling the problem,some are saying that basic decoders do not give enough startup power for the motor.
Has anyone on here had any problems,and would a more powerful decoder solve the problems.
Track and loco wheels have been cleaned
Thank you for your time
Frank
Heljan class 27
-
- Posts: 2
- Joined: Thu Oct 04, 2018 11:28 pm
- Contact:
Re: Heljan class 27
The Hornby basic decoder is by far the worst, i would try a better make first before going any further.
Re: Heljan class 27
Heljan locos are renown for their higher running current.
I would replace the decoder with something like a Lenz Silver or one from the ZImo range.
I would replace the decoder with something like a Lenz Silver or one from the ZImo range.
-
- Posts: 2
- Joined: Thu Oct 04, 2018 11:28 pm
- Contact:
Re: Heljan class 27
Thank you both for the helpful information and will look to replace with one or other of those recommended
Frank
Frank
Who is online
Users browsing this forum: No registered users and 0 guests