polystyrene

Your place to show and describe in detail and with photos how you produced a specific item of modelling. Rolling stock, Building or something related.
Post Reply
neil 60
Posts: 70
Joined: Fri Nov 15, 2019 5:16 pm
Contact:

polystyrene

#1

Post by neil 60 »

Hi I was watching New junction today is polystyrene safe to use I remember growing up and hearing tiles should be removed from ceilings can I have your thoughts please thank you.
User avatar
Walkingthedog
Posts: 4948
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: polystyrene

#2

Post by Walkingthedog »

What do you want to use it for? It needs to be kept away from power wires because it can cause the insulation to become brittle.

One of the problems with having it on ceilings is that people used to paint it with gloss paint and if it caught fire it dripped down in burning blobs.
Nurse, the screens!
User avatar
yelrow
Posts: 954
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgundy, France
Contact:

Re: polystyrene

#3

Post by yelrow »

my father put our ceiling tiles up with Evostick. Next day they had all melted and dripped on floor. Here in france, many ceilings are tiled with them, still.
User avatar
Walkingthedog
Posts: 4948
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: polystyrene

#4

Post by Walkingthedog »

Good for building hills etc.
Nurse, the screens!
Tricky Dicky
Posts: 381
Joined: Fri Oct 05, 2018 6:49 pm
Contact:

Re: polystyrene

#5

Post by Tricky Dicky »

neil 60 wrote: Tue Jun 06, 2023 6:07 pm Hi I was watching New junction today is polystyrene safe to use I remember growing up and hearing tiles should be removed from ceilings can I have your thoughts please thank you.
I watched that video too and was appalled at his sculpturing and amount of mess it was leaving, those little balls of polystyrene get everywhere and no amount of hoovering seems to get them all.

As WTD has said it reacts with PVC making it particularly dangerous around wiring. PIR is better and you can get fire retardant versions but you may have to go to specialist insulation suppliers to get hold of those. PIR can easily be carved with a knife and cut with a saw, it can be dusty but I find it is easily vacuumed up.

Richard
User avatar
Steve M
Posts: 3436
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: polystyrene

#6

Post by Steve M »

It's difficult to get hold of now but Wickes used to sell sheets of pink insulation foam which didn't comprise lots of round balls and could be sanded to shape after a rough cut with a knife.I've recently seen something similar in a branch of Selco which may be ok. These days I tend to use 50mm sheets of grey Jablite from B&Q - it still has balls but if cut with a hot wire cutter it's not too messy.
"Not very stable, but incredibly versatile." ;)
Tricky Dicky
Posts: 381
Joined: Fri Oct 05, 2018 6:49 pm
Contact:

Re: polystyrene

#7

Post by Tricky Dicky »

Steve M wrote: Wed Jun 07, 2023 12:25 am It's difficult to get hold of now but Wickes used to sell sheets of pink insulation foam which didn't comprise lots of round balls and could be sanded to shape after a rough cut with a knife.I've recently seen something similar in a branch of Selco which may be ok. These days I tend to use 50mm sheets of grey Jablite from B&Q - it still has balls but if cut with a hot wire cutter it's not too messy.
That will be PIR foam just the same as Kingspan and Celotex, I believe the pink one is the fire retardant type.

Richard
User avatar
Steve M
Posts: 3436
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: polystyrene

#8

Post by Steve M »

Tricky Dicky wrote: Wed Jun 07, 2023 9:34 am
Steve M wrote: Wed Jun 07, 2023 12:25 am It's difficult to get hold of now but Wickes used to sell sheets of pink insulation foam which didn't comprise lots of round balls and could be sanded to shape after a rough cut with a knife.I've recently seen something similar in a branch of Selco which may be ok. These days I tend to use 50mm sheets of grey Jablite from B&Q - it still has balls but if cut with a hot wire cutter it's not too messy.
That will be PIR foam just the same as Kingspan and Celotex, I believe the pink one is the fire retardant type.

Richard
That’s the best to use then - assuming you can get hold of it. :D
"Not very stable, but incredibly versatile." ;)
brian1951
Posts: 1257
Joined: Thu Oct 04, 2018 5:52 pm
Contact:

Re: polystyrene

#9

Post by brian1951 »

Go to any building site the skips are full of it. 8-)
neil 60
Posts: 70
Joined: Fri Nov 15, 2019 5:16 pm
Contact:

Re: polystyrene

#10

Post by neil 60 »

Thanks for your views I wont be using polystyrene I'll think of some think diffrent.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest