Bondic plastic welder

Suggest or recommend suitable tools for use in constructing your model railway.
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Bondic plastic welder

#1

Post by sandy »

I have not heard of this product before and also don't remember anyone mentioned it. I saw an advert while watching a model railway vid. If it is as good as the advert demonstrates it is an adhesive worth looking into. You put it on the item being joined like super glue and then cure it with ultraviolet light. Comes with a pen like dispenser one end and an ultraviolet light torch at other end of the pen for about £15. I am certainly going to get one to try out.
The advert claims it to be very strong bond, once cured, which takes only seconds. Also, excess glue can be sanded or cut to shape.
Would like to hear if anybody else has tried this product out and what they think of it.
Sorry if this has all been posted before by somebody, but I have not noticed it if it has.
Last edited by sandy on Sat Apr 11, 2020 10:07 am, edited 1 time in total.
Sandy
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Bondic plastic welder

#2

Post by Walkingthedog »

Been discussed several times on here. Dentists use a similar, or could be the same, product for fillings. Pretty good stuff by all accounts. Available on Amazon etc.

Similar things.


https://www.amazon.co.uk/s?k=bondic+sta ... b_ss_i_2_6
Nurse, the screens!
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Bondic plastic welder

#3

Post by sandy »

Thanks for that walkingthedog. I have not been on here long so that must be why I don't remember anyone mentioning it. It seemed better than super glue to me I intend trying it out.
Sandy
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Bondic plastic welder

#4

Post by Steve M »

JML were selling something similar a couple of years ago via the Range.
It has limitations - if the UV can’t ‘reach’ the glue it won’t set. Not ideal for opaque items as a result.
But I did find it very useful when attaching crew to locos where a ‘blob’ of glue is less obtrusive and a quick set is needed before the figures fall over.
No danger of misting from cyano fumes either.
"Not very stable, but incredibly versatile." ;)
User avatar
teedoubleudee
Posts: 1116
Joined: Fri Oct 05, 2018 2:53 pm
Location: Downham Market
Contact:

Re: Bondic plastic welder

#5

Post by teedoubleudee »

Walkingthedog wrote: Sat Apr 11, 2020 10:07 am Been discussed several times on here. Dentists use a similar, or could be the same, product for fillings. Pretty good stuff by all accounts. Available on Amazon etc.

Similar things.


https://www.amazon.co.uk/s?k=bondic+sta ... b_ss_i_2_6
Quite mixed reviews on Amazon with 17% giving it a minimum 1 star.
Most people are shocked when they find out how bad I am as an electrician
User avatar
Walkingthedog
Posts: 4972
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: Bondic plastic welder

#6

Post by Walkingthedog »

Well it works OK in my teeth :)
Nurse, the screens!
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Bondic plastic welder

#7

Post by sandy »

When I brought this subject up I think I should have asked if anyone else has any experience of the stuff. Sound from the comments that it is not as good as it sounded in the advert I saw. As you say works well on building up teeth. :D
Sandy
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: Bondic plastic welder

#8

Post by Steve M »

It's worth is dependent on what it's being used for, same as any other glue.
Any adhesive in the wrong conditions won't perform properly.
Horses for courses and all that. :D
"Not very stable, but incredibly versatile." ;)
User avatar
Forfarian
Posts: 218
Joined: Thu Oct 04, 2018 4:54 pm
Location: Angus
Contact:

Re: Bondic plastic welder

#9

Post by Forfarian »

It is used for coating some fishing flies, it's a type of epoxy, paint it on and cure it with the UV light.
It certainly works on the flies, but it still gets chewed up by an angry trout!!
Forfarian aka Tim
Of course I talk to myself, I sometimes need expert advice!
sandy
Posts: 619
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna Scotland
Contact:

Re: Bondic plastic welder

#10

Post by sandy »

Thanks, Steve, for reply seems you are the only one who has tested it out. I should not have taken advert so seriously, In the advert it sounded like a new wonder glue stronger and more versatile than any other product on the market. Clearly it is not. Never mind :(
Sandy
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests