LOW GHYLL

Dedicated area to show the community your model railway projects.
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#11

Post by Steve M »

Free with this month’s Railway Modeller and an opportunity to try some slightly different techniques.

Overall spray with Halfords grey primer followed by a couple of dirty washes, one brown, one black.
Rusty highlights on strapping and hinges (powder mixed with Decalfix). Soot, green and sand powders for the roof and bottom two planks. Masking tape patches on the roof. Rust and chipped paint on the metal vents at each end and an overall coat of satin varnish.


Image20181110_121445 by Steve Mumford, on Flickr
"Not very stable, but incredibly versatile." ;)
User avatar
Brian
Posts: 2215
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: LOW GHYLL

#12

Post by Brian »

Like it! Looks very authentic. :D
Image << Click the Icon to go to my website
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#13

Post by Steve M »

Brian wrote: Sat Nov 10, 2018 1:35 pm Like it! Looks very authentic. :D
And that shed is portable for exhibitions. :D :D
"Not very stable, but incredibly versatile." ;)
User avatar
Brian
Posts: 2215
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: LOW GHYLL

#14

Post by Brian »

Gosh that great, but I don't think the low loader needed to move it and cranes at both ends of the journey to lift it fall within our budget! :mrgreen:
Image << Click the Icon to go to my website
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#15

Post by Steve M »

I can fit that one in my pocket - and I’m cheap. :D
"Not very stable, but incredibly versatile." ;)
User avatar
Brian
Posts: 2215
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: LOW GHYLL

#16

Post by Brian »

Steve M wrote: Sat Nov 10, 2018 2:55 pm I can fit that one in my pocket - and I’m cheap. :D
No Comment! :D :D
Image << Click the Icon to go to my website
Paul Palmer
Posts: 87
Joined: Sun Oct 07, 2018 12:46 pm
Location: Devon
Contact:

Re: LOW GHYLL

#17

Post by Paul Palmer »

that looks really good,very authentic
User avatar
Steve M
Posts: 3461
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: LOW GHYLL

#18

Post by Steve M »

Not a great deal of modelling recently apart from adding a Wills pillbox kit next to the tunnel. Weathered with washes and powders, then blended into the embankment with static grass and poly fibre.

Image20181202_133436 by Steve Mumford, on Flickr

Image20181202_133817 by Steve Mumford, on Flickr
"Not very stable, but incredibly versatile." ;)
Bandit Mick
Posts: 908
Joined: Thu Oct 04, 2018 7:42 pm
Contact:

Re: LOW GHYLL

#19

Post by Bandit Mick »

Thanks Steve esp. for the uncoupler pictures.
footplate1947
Posts: 758
Joined: Fri Oct 19, 2018 8:32 am
Location: Norham, Northumberland
Contact:

Re: LOW GHYLL

#20

Post by footplate1947 »

Hi Steve ..........Like it very much. Lovely modelling. Would like to see a shot of the station if you have one. Full width if possible. John
If only there was enough hours in the day..................John
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests