LOW GHYLL
Re: LOW GHYLL
Free with this month’s Railway Modeller and an opportunity to try some slightly different techniques.
Overall spray with Halfords grey primer followed by a couple of dirty washes, one brown, one black.
Rusty highlights on strapping and hinges (powder mixed with Decalfix). Soot, green and sand powders for the roof and bottom two planks. Masking tape patches on the roof. Rust and chipped paint on the metal vents at each end and an overall coat of satin varnish.
20181110_121445 by Steve Mumford, on Flickr
Overall spray with Halfords grey primer followed by a couple of dirty washes, one brown, one black.
Rusty highlights on strapping and hinges (powder mixed with Decalfix). Soot, green and sand powders for the roof and bottom two planks. Masking tape patches on the roof. Rust and chipped paint on the metal vents at each end and an overall coat of satin varnish.
20181110_121445 by Steve Mumford, on Flickr
"Not very stable, but incredibly versatile."
Re: LOW GHYLL
And that shed is portable for exhibitions.
"Not very stable, but incredibly versatile."
Re: LOW GHYLL
Gosh that great, but I don't think the low loader needed to move it and cranes at both ends of the journey to lift it fall within our budget!
Re: LOW GHYLL
I can fit that one in my pocket - and I’m cheap.
"Not very stable, but incredibly versatile."
-
- Posts: 87
- Joined: Sun Oct 07, 2018 12:46 pm
- Location: Devon
- Contact:
Re: LOW GHYLL
Not a great deal of modelling recently apart from adding a Wills pillbox kit next to the tunnel. Weathered with washes and powders, then blended into the embankment with static grass and poly fibre.
20181202_133436 by Steve Mumford, on Flickr
20181202_133817 by Steve Mumford, on Flickr
20181202_133436 by Steve Mumford, on Flickr
20181202_133817 by Steve Mumford, on Flickr
"Not very stable, but incredibly versatile."
-
- Posts: 908
- Joined: Thu Oct 04, 2018 7:42 pm
- Contact:
-
- Posts: 758
- Joined: Fri Oct 19, 2018 8:32 am
- Location: Norham, Northumberland
- Contact:
Re: LOW GHYLL
Hi Steve ..........Like it very much. Lovely modelling. Would like to see a shot of the station if you have one. Full width if possible. John
If only there was enough hours in the day..................John
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot], Steve M and 2 guests